|
J Cafe
Mar 1, 2017 17:58:31 GMT -5
via mobile
Post by daffey1 on Mar 1, 2017 17:58:31 GMT -5
Thanks, I'm not done yet, still doing the pin hole and scratches filling. Sooooo time consuming
|
|
|
J Cafe
Apr 9, 2017 9:09:17 GMT -5
Post by daffey1 on Apr 9, 2017 9:09:17 GMT -5
Well, things have been a bit slow but here is a 17" rim still attached to the hub, it's from a Honda XL600 removed rim and started clean up then painted and clear coated rim and hub. Hub is from a XV750 Then laced together with custom spokes from Buchanans Spoke and Wheel in the US. I didn't use a dial indicator when truing the wheel, just a pointer, so I can't give you a measurment for the run out. and finally installed on the XJ750 chassis
|
|
|
J Cafe
Jun 4, 2017 13:08:22 GMT -5
Post by daffey1 on Jun 4, 2017 13:08:22 GMT -5
|
|
|
J Cafe
Jun 13, 2017 14:49:45 GMT -5
Post by daffey1 on Jun 13, 2017 14:49:45 GMT -5
Here are a couple pics of the firment of my XV hub with the Honda 17"rim and Buchanan custom made spokes fitted to my Seca diff. befor any machining And after machining and custom grinding for fitment.It sits 2.5mm off center still but I don't dare go any more as I would have to actually start shortening the splines of the drive gears in the hub and on the diff.
|
|