|
Post by seaglider on Nov 3, 2013 10:22:04 GMT -5
So now that we've got two motors on the go we're thinking we might just put the Fast by Gast into an H2 frame that Drewski has....apply reeds to mellow out the beast motor.....cover with the Tracy....then let simmer for an hour...voila one cooking hot street machine. With the ZRX running gear properly set up heck we could have some fun on the track
|
|
|
Post by Walms on Nov 3, 2013 10:35:30 GMT -5
Wow, that sounds cool!!!
|
|
|
Post by drewski on Nov 3, 2013 17:30:08 GMT -5
Ya, it could make a nice little machine for Seaglider to join Zambia in terrorizing the peaceful neighbourhoods of Oakville!!
|
|
|
Post by drewski on Nov 4, 2013 22:07:25 GMT -5
Here's what I'm talkin' 'bout!! It's coming outta this! I trust the painter didn't lie... Should make for an interesting winter trying to figure this one out.
|
|
|
Post by flipsk12 on Nov 5, 2013 8:59:14 GMT -5
damn, good score. I wonder what lies in that motor. I can see the oil pump had been removed, wonder what other goodies you'll find.
|
|
|
Post by drewski on Nov 5, 2013 9:54:29 GMT -5
damn, good score. I wonder what lies in that motor. I can see the oil pump had been removed, wonder what other goodies you'll find. Ya, it's definitely pre-mix! Well, from the seller, he claims it's a Stage III FBG motor. He also claims a "9 point something" sec 1/4 mile run. I've been told if that's true, it would likely be a 120 hp Stage III motor. We can see Lectron carbs on it, but we'll see when we open it up. It's gonna feel like Christmas morning! Anybody want a dragbike chassis??
|
|
|
Post by flipsk12 on Nov 6, 2013 15:42:25 GMT -5
Might have to modify that wheelie bar for cornering, haha that's gonna be a handful!
|
|
|
Post by drewski on Nov 6, 2013 18:56:09 GMT -5
Might have to modify that wheelie bar for cornering, haha that's gonna be a handful! Haha! You otta see the turning circle for this beast too!! At full lock I bet it's about a 50 - 60 foot circle!!
|
|
|
Post by Curtis on Nov 6, 2013 18:59:47 GMT -5
Might have to modify that wheelie bar for cornering, haha that's gonna be a handful! Haha! You otta see the turning circle for this beast too!! At full lock I bet it's about a 50 - 60 foot circle!! Sounds like my chopper....
|
|
|
Post by drewski on Nov 6, 2013 19:02:15 GMT -5
Haha! You otta see the turning circle for this beast too!! At full lock I bet it's about a 50 - 60 foot circle!! Sounds like my chopper.... Oops... never thought about that!!
|
|
|
Post by Curtis on Nov 6, 2013 19:04:24 GMT -5
Its basically a straight ride from my house to bike night anyways, hahah
|
|
|
Post by drewski on Nov 6, 2013 20:08:17 GMT -5
Its basically a straight ride from my house to bike night anyways, hahah
|
|
|
Post by seaglider on Nov 15, 2013 18:36:48 GMT -5
Mucking about with the FBG engine to see if it would lite Found the kick start wasn't working so I thought we could mount the wheelie bars upside down as a push bar....worked well. Replaced old yellowed lines from the petcock to the carbs...middle carb leaked cleared that, put air in the tires and air shifter. Put fresh gas in the tank and off we go. I was thinking of pushing it with the truck so we through an old tire on the elevated wheelie bar....took a short vid But it seemed not to be firing....we checked for spark and saw none. Fooled around with the coils for a while but ran out of time....don't worry we'll get it going...I really want to hear it run with those crazy chambers
|
|
|
Post by pipe welder on Nov 17, 2013 17:15:04 GMT -5
Drew could fire that up in the shop and you'll hear it at you place Don...
|
|
|
Post by drewski on Nov 17, 2013 18:45:12 GMT -5
Drew could fire that up in the shop and you'll hear it at you place Don... I think women and children will be scurrying for cover when this thing finally does run!!
|
|