|
Post by rz350ypvs on Jan 16, 2011 17:38:44 GMT -5
I just picked this up today. I have wanted to build up an RD for a while now. Here is my parts list- RD350 engine RD400 gas tank FZ600 swingarm KZ1000 rear spoke/disc wheel R6 shock FZR600 forks/rotors/calipers XS650 front wheel hub TZ style front fender Fiberglass tail/seat FPP chambers
|
|
|
Post by Curtis on Jan 16, 2011 17:54:21 GMT -5
Nice!
RD350LC or you sticking with the air cooled?
|
|
|
Post by rz350ypvs on Jan 16, 2011 18:18:33 GMT -5
It will be an aircooled, but I am planning on welding radiator mounts to the frame incase I ever decide to install some RDLC cylinders.. they will drop right on the aircooled bottom end. Then just hook up an electric water pump.
|
|
|
Post by Walms on Jan 16, 2011 19:10:12 GMT -5
Sounds cool Dave!!! Is the H1/S1 taking a back seat though?
|
|
|
Post by rz350ypvs on Jan 16, 2011 19:24:11 GMT -5
^ Definitley not.. This will probably be an even longer term project, if that's possible. The H1 motor will come together this year.. I promise ;D
|
|
|
Post by Curtis on Jan 16, 2011 20:38:14 GMT -5
Will you be at Triples in Tweed this year and Paris?
Regardless of the bike, all of you work looks incredible and would like to take a closer look at one of your bikes!
|
|
|
Post by rz350ypvs on Jan 16, 2011 21:30:06 GMT -5
Thanks Curtis . I will be at Paris for sure. My bikes look better in the pics I post than in person ;D If you're ever in Brampton for some strange reason, stop by.
|
|
|
Post by Curtis on Jan 16, 2011 21:34:35 GMT -5
I will be in Brampton for a wedding in August,
hmmm, how much shit would i get in from the wife if i left her alone at the wedding to go look at motorcycles?
|
|
|
Post by intrudin on Jan 17, 2011 19:26:30 GMT -5
Was nice meeting you and your pop's Dave ...didnt take you long to start playing with it.. looks like yer ahead of Drewski's project already
|
|
|
Post by rz350ypvs on Jan 17, 2011 19:43:08 GMT -5
Was nice meeting you and your pop's Dave ...didnt take you long to start playing with it.. looks like yer ahead of Drewski's project already ;D I wanted to do a compression test on the motor. It had a very mild seizure from sitting, but I got it free. I got 125psi left an 95psi right.. it has 1st over pistons in it already. I have a spare set of aircooled RD350 cylinders that my go on it if the crank is good.
|
|
|
Post by rz350ypvs on Jan 17, 2011 20:30:28 GMT -5
Some parts..
|
|
|
Post by Curtis on Jan 18, 2011 21:23:20 GMT -5
Clip on's ?
|
|
|
Post by rz350ypvs on Jan 18, 2011 21:50:40 GMT -5
Yes, I still need to buy some FZR clip ons and the top triple clamp.
|
|
|
Post by rz350ypvs on Jan 19, 2011 20:18:22 GMT -5
Swingarm mounted.
|
|
|
Post by Curtis on Jan 19, 2011 21:23:19 GMT -5
I like your seat, the RD400 tank is longer, isn't it? to make up the little less room that seat takes up?
|
|