|
Post by givr on Aug 31, 2015 18:59:31 GMT -5
Got this bad boy from drewski. Showed promise. youtu.be/K2-UavsgtaEPut it all together. Ran the engine for 20 minutes total then she started smoking more than a rich triple with bad check valves. Found this under the valve lifter on the 1st cylinder exhaust side. Valve seal has disintegrated. Should be straight forward to replace.
|
|
|
Post by Curtis on Aug 31, 2015 19:27:10 GMT -5
Not too bad !
How far into it you goinf
|
|
|
Post by drewski on Aug 31, 2015 20:26:35 GMT -5
I'm sure you'll have it singing in no time. Right now, I'm wishing I still had that unit. I'm looking for some engine parts myself.
|
|
|
Post by Curtis on Aug 31, 2015 21:06:08 GMT -5
Drew , what you need bud
|
|
|
Post by JA-Moo on Aug 31, 2015 23:11:38 GMT -5
From the look of the head mod, there is a big lift cam in there. Make sure the seal isn't being beaten up........
|
|
|
Post by zambia on Sept 1, 2015 7:03:43 GMT -5
I love the paint job...can it be saved?
|
|
|
Post by sooperarthur on Sept 1, 2015 9:17:01 GMT -5
You sure can't beat the rumble from those!
|
|
|
Post by givr on Sept 1, 2015 17:18:16 GMT -5
I love the paint job...can it be saved? Sure. If I leave it as is. There's some rough spots on the tail. You know me, I can leave body work pretty ratty. More concerned about functionality at this point. And we are not functional.
|
|
|
Post by Curtis on Sept 1, 2015 17:24:26 GMT -5
Pm me, I got most of Drews stuff/can get.
|
|
|
Post by givr on Sept 1, 2015 17:35:50 GMT -5
Vintage gold flake pin striping and candy barf paint?
|
|
|
Post by Curtis on Sept 1, 2015 17:41:12 GMT -5
Vintage gold flake pin striping and candy barf paint? You would be surprised.... We just sold a PINT of "Honda Illusion Red" at $1,500 for the pint...The colour was only offered for 1 year in the states only....
|
|
|
Post by givr on Sept 6, 2015 15:24:42 GMT -5
Head is off, all 4 exhaust valve seals are shot. Little bits under the lifter just like the 1st. Pistons look good
|
|
|
Post by Curtis on Sept 6, 2015 15:40:41 GMT -5
Do the valve seats need to be re cut
|
|
|
Post by givr on Oct 6, 2015 16:43:26 GMT -5
Got a valve compressor from p auto. 55 bucks. 2 broken lifter springs so far 4 out of 8. Working the exhaust side first. 1 bad valve guide on cyl3 and a peened valve on cyl 2 that wont come out. Cam lift is 0.420". The broken spring in 2 must've bound up and mushroomed the valve.
|
|
|
Post by drewski on Oct 6, 2015 17:13:41 GMT -5
Yikes!!
|
|