|
Post by sbs on Feb 18, 2013 3:57:30 GMT -5
Coming along, good effort.. & you are -surely- gonna radius cut/trim those huckery-looking squared off inlet adapters, eh..
|
|
|
Post by daffey1 on Feb 18, 2013 13:17:26 GMT -5
I did think of rounding them off but just didn't get to it yet. Too busy digging my self out of the snow. Today is the third Monday in a row that stormed so bad nearly everything is shut down.
|
|
|
Post by daffey1 on Mar 16, 2013 7:58:28 GMT -5
I got a little bored waiting for my tranny brgs to arrive so since I didn't have a c/s sprocket cover, I thought I'd make one. It's not perfect, because it is all hand cut, but if anyone gets that close down there I'll just give 'em a kick
|
|
|
Post by Walms on Mar 16, 2013 8:47:12 GMT -5
That looks K-ewl Fred! I do have a spare cover you can have if you want it... I can bring it to the hockey game but custom is always better. What type of chambers were you thinking? If tuked you will need to relocate or replace the stock side stand mount.
|
|
|
Post by daffey1 on Mar 16, 2013 9:08:57 GMT -5
I would prefer tucked under, but I thing the rear mono shock might get in the way? Is it possible to have tucked under pipes with the shock being where it is? I can send more pics if need be. Thanks for the offer of the cover but I think I'll stick with the one I made. I'm now thinking of modifing the oil pump cover some how.
|
|
|
Post by Walms on Mar 16, 2013 12:23:07 GMT -5
You have an option if you are willing to take a risk.... Do you plan to have the rear jacked up a bit?
|
|
|
Post by Walms on Mar 16, 2013 12:27:40 GMT -5
|
|
|
Post by daffey1 on Mar 16, 2013 12:41:48 GMT -5
I would rather leave the swing arm positioning where it is as it took some time to get the geometry for everything to align up properly
|
|
|
Post by Walms on Mar 16, 2013 14:34:50 GMT -5
Here is an example of a mono shock with std pipes.
|
|
|
Post by daffey1 on Mar 16, 2013 14:53:03 GMT -5
The rear shock lower linkage appears to be close to mine from these pics. It looks like this is the set up I'll have to go with. It still looks clean, simple and racy at the same time. Do your pipes come with this style of mufflers or are they separate?
|
|
|
Post by Curtis on Mar 16, 2013 15:21:01 GMT -5
Separate. They come with just the stingers
|
|
|
Post by daffey1 on Mar 16, 2013 15:33:45 GMT -5
Where can I get a set? or does some one this site make them?
|
|
|
Post by Walms on Mar 16, 2013 17:13:55 GMT -5
Jim Hobbs from this site sells them.
|
|
|
Post by bake on Mar 17, 2013 12:12:37 GMT -5
Here is an example of a mono shock with std pipes. Pretty sweet looking build, who's is that? Is there a build page?
|
|
|
Post by Walms on Mar 18, 2013 14:04:03 GMT -5
The owner is Jerry from this board.. I'm not sure if he even has a build thread here though... This is the finished product.
|
|