|
Post by triplepoweredgpz on Jan 1, 2016 14:11:55 GMT -5
I just need something to get it back on the road next season...I've bin dragging my a$$, and money is tight so I have the werges that came with the bike...they have bin modified some what to fit the gpz, I hear some of you fellas talking about shorting the belly...they act like denco's?
|
|
|
Post by Jim on Jan 1, 2016 15:58:05 GMT -5
|
|
|
Post by triplepoweredgpz on Jan 1, 2016 17:02:06 GMT -5
Cool, thanks...the baffles have already bin removed...think the same mod on a h1 would work as well?
|
|
|
Post by Jim on Jan 1, 2016 17:34:51 GMT -5
As a guess, yes. Maybe even shorter for the higher RPM range of an H1. I have no experience or dyno graphs to back that up though. As far as I know, Wirges H1 and H2 chambers were the same, except for the hangers.
|
|
|
Post by triplepoweredgpz on Jan 1, 2016 17:45:03 GMT -5
Would be interesting if I could hit my goals with the least desirable pipes...I don't expect it, but it would be a pleasant surprise
|
|
|
Post by Walms on Jan 1, 2016 23:04:12 GMT -5
Your motor is H2 correct?
|
|
|
Post by triplepoweredgpz on Jan 1, 2016 23:21:13 GMT -5
H1
|
|
|
Post by triplepoweredgpz on Jan 1, 2016 23:31:48 GMT -5
Your motor is H2 correct? Some stuck aluminum silencers on these werges, they look a little backyard for me...any suggestions?
|
|
|
Post by Jim on Jan 1, 2016 23:38:16 GMT -5
It sort of looks like someone jammed an aluminum tube over the 2" OD Wirges silencer tube, but you're closer to the item than I am.
|
|
|
Post by Walms on Jan 1, 2016 23:38:40 GMT -5
That's good then. I have Wirges pipe numbers in the Vannik, I'll play with the belly length and see what it does. Stock port?
|
|
|
Post by triplepoweredgpz on Jan 1, 2016 23:50:31 GMT -5
That's good then. I have Wirges pipe numbers in the Vannik, I'll play with the belly length and see what it does. Stock port? 190 ex, is what I'm shooting for...you need the width as well? I believe 43mm would be the width
|
|
|
Post by triplepoweredgpz on Jan 1, 2016 23:52:07 GMT -5
It sort of looks like someone jammed an aluminum tube over the 2" OD Wirges silencer tube, but you're closer to the item than I am. They just riveted on...maybe I'll pop them off, see what's inside
|
|
|
Post by triplepoweredgpz on Jan 2, 2016 0:05:17 GMT -5
It sort of looks like someone jammed an aluminum tube over the 2" OD Wirges silencer tube, but you're closer to the item than I am. They just riveted on...maybe I'll pop them off, see what's inside You are correct good sir....the aluminum tube just holds this fella in
|
|
|
Post by Curtis on Jan 2, 2016 7:23:22 GMT -5
Baffles?
We don't need no stinkin baffles,
|
|
|
Post by Walms on Jan 2, 2016 7:35:39 GMT -5
That's good then. I have Wirges pipe numbers in the Vannik, I'll play with the belly length and see what it does. Stock port? 190 ex, is what I'm shooting for...you need the width as well? I believe 43mm would be the width That should be good for a test, pipe changes are fairly relative.
|
|