roadrash
2nd Gear
10 McNab St.E. Port Dover
Posts: 271
|
Post by roadrash on Nov 22, 2015 12:40:09 GMT -5
Finally received resistors for my indicator light and they didn't work.Will leave light disconnected in case it gets warm again.
|
|
|
Post by triplepoweredgpz on Nov 22, 2015 13:06:59 GMT -5
How's you hook them up? Once again people may tell me I did it wrong...but it worked for me but I grounded one end and spliced the other end into the positive of the turn signal, when I put them in line they didn't work
|
|
roadrash
2nd Gear
10 McNab St.E. Port Dover
Posts: 271
|
Post by roadrash on Nov 22, 2015 21:44:41 GMT -5
I tried them inline with the indicator lines.When in all four signals come on. Putting one on the signal flasher would leave the indicator hooked up to both sides of the signals. I'll test again tomorrow.
|
|
|
Post by triplepoweredgpz on Nov 27, 2015 6:59:14 GMT -5
I tried them inline with the indicator lines.When in all four signals come on. Putting one on the signal flasher would leave the indicator hooked up to both sides of the signals. I'll test again tomorrow. Still no luck?
|
|