|
Post by sbs on Feb 13, 2013 18:35:48 GMT -5
Interested in a 21st century reproduction set of H-series S.F.s? P.M me & we can make it happen..@ $300- a set.
|
|
|
Post by sbs on Feb 13, 2013 18:47:25 GMT -5
& for forum members, - I `ll pay the postage..
|
|
|
Post by sbs on Feb 14, 2013 1:56:36 GMT -5
Ok members, these are new, professionally manufactured [ by TTIndustriesNZ ] items, I paid to have them produced - so I did`nt have to risk worn-out ,or bodged-up, old stuff, or chase over-priced NOS Ebay rip-offs. I had to get a minimum quantity made, so I am offering the excess to triples enthusiasts at a price that beats the alternative. There are a limited quantity available, so 1st in- best dressed...
|
|
|
Post by lc on Feb 14, 2013 12:29:52 GMT -5
Does your 2/3 fork have the updated wider base? If so, there would be 3 different forks in your sets.....
What material are your forks made of? Any sort of heat treating/tempering carried out? ....Too soft and they will wear and possibly bend. Too hard/brittle they could break off and jam the trans, possibly with fatal results...
There is indeed some considerable side load applied to the forks, regardless of back cutting. This typically happens most when the commanded to be engaged gears have their dogs aligned end to end at time of shift (it sometimes takes a moment of the differential speed of the two gears involved to open the dog's slot to allow the mating dogs to engage). This is why you can't cycle through all 5 gears with engine off at a standstill..
J
|
|
|
Post by sbs on Feb 14, 2013 16:02:01 GMT -5
k, P.M. me, if you`d like a set to examine.. They are produced to 21st century standards by a reputable maker of racing & hard-use motorcycle/race-car gearboxes TTIndustriesNZ. They are accurate dimensional copies of the original parts, cast from up to date/spec steel, machined & finished to a superior standard compared with the alternatives available - inc expensive NOS items.
|
|
|
Post by sbs on Feb 14, 2013 17:50:01 GMT -5
Only 8 sets left...get in or dip out eh..
|
|
|
Post by sbs on Feb 15, 2013 3:11:22 GMT -5
|
|
|
Post by sbs on Feb 15, 2013 23:39:52 GMT -5
OK here`s a deal, the next 3 members to P.M. me get a set free, on the proviso that you pay me what you think they are worth...honestly.
|
|
|
Post by sbs on Feb 16, 2013 2:28:07 GMT -5
Be advised, I have a buyer in Europe who wants all my available sets, inc those I have allocated here.. So to be fair, 24hrs, members - then they are gone...more in a few months, perhaps, or yes -a bit more expensively from Europe..
|
|
|
Post by III on Feb 16, 2013 10:05:18 GMT -5
Be advised, I have a buyer in Europe who wants all my available sets, inc those I have allocated here.. So to be fair, 24hrs, members - then they are gone...more in a few months, perhaps, or yes -a bit more expensively from Europe.. I'll take a set if you throw in some of dat reefer you been smokin'
|
|
|
Post by sbs on Feb 16, 2013 16:56:12 GMT -5
PM me...maybe we can trade, -still got your vitamin K handy?..
|
|
|
Post by sbs on Feb 16, 2013 20:38:35 GMT -5
Today is the last chance for this production tranche members, & I m posting the balance tomorrow. So, to be fair, I`ll accept advance orders for the next lot.
|
|