paul
2nd Gear
Posts: 462
|
Post by paul on Aug 19, 2012 20:17:57 GMT -5
dudes, just picked up a little samurai. i think all it'll need is a tidy up, a few odds and ends and a RH exhaust.  |
|
|
|
Post by bake on Aug 19, 2012 20:48:04 GMT -5
Very cool.
|
|
jay
2nd Gear
Posts: 84
|
Post by jay on Aug 19, 2012 21:07:39 GMT -5
Nice bike.
Looks good !
|
|
|
|
Post by H2 Dude on Aug 19, 2012 22:47:14 GMT -5
Paul that is one nice A1...hey with all the A series guys here maybe some day when all of them are together we'll have an A series meet.
Where did you buy it Paul?
|
|
paul
2nd Gear
Posts: 462
|
Post by paul on Aug 20, 2012 3:15:18 GMT -5
twins in tweed...?
i bought it from a guy in stouffville.
|
|
|
|
Post by johnnyc14 on Aug 20, 2012 5:02:49 GMT -5
That A1 is a twin (pun intended) to the one I bought in 1971. It looks great Paul.
|
|
paul
2nd Gear
Posts: 462
|
Post by paul on Aug 20, 2012 5:32:06 GMT -5
does anyone make expansion chambers for the bike? my RH pipes is bashed. a used original one would do also.
|
|
dickjny
2nd Gear
Wish the best to all my KTC, US & Canadian Triple rider friends! Dick J. - NY
Posts: 211 
|
Post by dickjny on Aug 22, 2012 19:58:05 GMT -5
- I believe there are dimension in the service manual for what the factory built for expansion chambers. I'll look around for mine and see.
- I had a 1968 A7SS until the flood hit in 1972. I loved that bike!
... Dick J. - NY
|
|
paul
2nd Gear
Posts: 462
|
Post by paul on Aug 26, 2012 19:35:55 GMT -5
hey, who sells the little 6mm stat-o-seals for oil pump banjo's?... i forgot where i got mine from
|
|
|
|
Post by Walms on Aug 26, 2012 20:03:38 GMT -5
Reproduction Decals has them..
|
|
|
|
Post by johnnyc14 on Aug 26, 2012 22:01:37 GMT -5
does anyone make expansion chambers for the bike? my RH pipes is bashed. a used original one would do also. Hey Paul, there has been lots of discussion on other forums regarding dimensions for the best working chambers for the A7 and the testing done revealed this pipe worked best using the stock lead-in pipes. This pipe would probably work ok on an A1 also. The numbers above the pipe represent inside diameter, those below are length of each section. Disregard the word "perforated" on the image, that was me doodling and thinking of making a baffled chamber. I'm working on getting someone to make the cone sections for me.  |
|
paul
2nd Gear
Posts: 462
|
Post by paul on Aug 27, 2012 3:23:08 GMT -5
cool beans, thanks walms, johnny
|
|
