|
Post by ballvo on Feb 13, 2012 16:33:20 GMT -5
|
|
|
Post by lc on Feb 13, 2012 17:47:14 GMT -5
Provided the drill hole in them is the correct 2,5mm? for our gravity feed systems they should be good. (Pressure feed systems (fuel pump equipped) typically have a smaller drill hole).
I ran the float valves out of the poor quality "keystar" kits in my 28s (when I ran the stock carbs) with no issues fwiw.
J
|
|
|
Post by ballvo on Feb 13, 2012 18:08:21 GMT -5
Thanks, Scott.
I'll double check with them on the size. I think I'll try a set if they sound correct.
Cheers, Neil
|
|