Post by wheeliehappy on Nov 13, 2011 19:06:19 GMT -5
Not sure how you guys fix them little plastic parts that break, this is what I did for the head light switch.
pic1 is the broken part, I'm sure you'll reconize it
Pic2 is the mold, its like rubber but heated it will form to what you want, i used the part for the High low beem to make the mold, just push it in and let it cool then remove the good part.
pic3 is the broken peice in the mold after the mold cooled
Pic4 is the broken piece in the mold with the powder with out the resin or hardener
Pic5 is 10 min after adding the hardener
Pic6 if fini.
its better then franks red hot and use that shit to fix everything.
Hope you guys find this interesting, just seems to be the easiest way to fix stuff. its called Plastex, Home Hardware will carry it or they will order it.
pic1 is the broken part, I'm sure you'll reconize it
Pic2 is the mold, its like rubber but heated it will form to what you want, i used the part for the High low beem to make the mold, just push it in and let it cool then remove the good part.
pic3 is the broken peice in the mold after the mold cooled
Pic4 is the broken piece in the mold with the powder with out the resin or hardener
Pic5 is 10 min after adding the hardener
Pic6 if fini.
its better then franks red hot and use that shit to fix everything.
Hope you guys find this interesting, just seems to be the easiest way to fix stuff. its called Plastex, Home Hardware will carry it or they will order it.Attachments:
