|
Post by Curtis on Nov 13, 2011 8:17:58 GMT -5
Just for Dave Picked this gem up from Brad (autofobe) yesterday and started going to town on it. Main goal for now is to get it up and running with some upgraded fork springs and rear shocks, tie the rear frame together with a hoop, and get it all pieced together, running reliably. Have a few other top ends that I am going to go a bit aggressive on porting, but for the first year I will keep stock porting with 1mm shaved off back side of the piston. Oh ya, and that's a factory TD-1 fairing I got off him too Rear sets were just ordered as well as the template for the rear hoop made... Curtis P.S. Brads H1R = pure awesome, I had a hard time not staring at it
|
|
jacko
2nd Gear
Posts: 468
|
Post by jacko on Nov 13, 2011 17:17:33 GMT -5
nice project for the winter good luck. jack
|
|
|
Post by Curtis on Nov 13, 2011 18:29:18 GMT -5
Here's the kick ass twin leading from brake Attachments:
|
|
|
Post by wheeliehappy on Nov 13, 2011 19:17:41 GMT -5
I love that Fairing.
|
|
|
Post by rz350ypvs on Nov 13, 2011 19:44:01 GMT -5
^ I agree, the fairing looks awesome. Cool bike!
|
|
|
Post by Curtis on Nov 13, 2011 21:39:28 GMT -5
Thanks lads,
As of right now, the bike is bare bones roller...
I had a set of old school mullholland rear shocks that were just a sliver shorter, so they are on there now, actually leveled the bike out a lot more.
Bike is going to my shop this week to get the frame de tabbed (if rules allow) and rear hoop made and installed (if rules allow)
Motor is on the bench, going to slowly start pulling it down, everything looks to be solid so I am not for seeing any major problems.
|
|
|
Post by rz350ypvs on Nov 17, 2011 20:31:19 GMT -5
Will you be running that bike in a specific class? Will a YR1 motor drop in?
|
|
|
Post by autofobe on Nov 17, 2011 21:14:57 GMT -5
Why do you have a YR1 engine? Brad
|
|
|
Post by Curtis on Nov 18, 2011 6:38:10 GMT -5
Looks like i will be running P2 LWT
and ya, do you have a YR1 engine?
Motor is back together, just waiting on my re worked heads to come back
Fairing is heading to georgetown in the new year to get the ears repaired, as well as the bit of road rash repaired, the wind screen made and installed, and picking up my fiberglass seat as well.
|
|
|
Post by rz350ypvs on Nov 18, 2011 14:04:11 GMT -5
I just might have a YR1 motor ;D
|
|
|
Post by pipe welder on Nov 18, 2011 17:51:03 GMT -5
What "Rear Sets" did you buy?
|
|
|
Post by Curtis on Nov 18, 2011 18:27:35 GMT -5
|
|