|
Post by lc on May 18, 2011 13:41:21 GMT -5
Gents, I have supplied mraxl some detailed pics of an original H1B seat before I disassembled it for restoration (I purchased this myself circa 1973,with only a small cut on the RHS at the time). I suspect the measurements shown are the same for the 69-71 seat too (to get the piping in the correct position etc). For those that are trying to get a perfect resto job for an H1B/C please note the original seat has 12 pleats, a seam at the back, and is folded and stitched where attached under the seat pan. kawtriple.com/mraxl/tips/seatcover/earlyh1/early_h1_seatcover_dims.htmJ
|
|