|
Post by drewski on Jan 27, 2010 10:02:00 GMT -5
Yikes!! I think I might give it ALL up for a beauty like this!! Obviously, it's not mine. I "borrowed" it from another 2 stroke nut! Looks like it might be a Yammie RZ tank and frame, but I'd love an "R" frame, set up for the street! Thoughts?? Comments?? ;D
|
|
|
Post by Lou on Jan 27, 2010 10:47:45 GMT -5
|
|
|
Post by drewski on Jan 27, 2010 11:03:13 GMT -5
|
|
|
Post by autofobe on Jan 27, 2010 11:04:53 GMT -5
Nice.................Looks like a Yammy RZ tank, but not the frame.RZ frame had rectangle tubes & a monoshock swinger. Still, some sweet custom work. ;D Brad
|
|
|
Post by drewski on Jan 27, 2010 12:03:40 GMT -5
Actually, here is a '84 RZ350 frame: Pretty close, dontcha think?! ;D
|
|
|
Post by H2 Dude on Jan 27, 2010 12:20:35 GMT -5
SWEET ;D
Next project EH Drew?
|
|
|
Post by drewski on Jan 27, 2010 12:54:01 GMT -5
SWEET ;D Next project EH Drew? Shhhhhhh!! Not so loud!!
|
|
|
Post by autofobe on Jan 27, 2010 13:22:23 GMT -5
My mistake I have two rdlc frames that look just like that for my next project.Early Rz frames must have been left over from RDLC. I wonder why he lost the momoshock. Sure looks the business.
|
|
|
Post by autofobe on Jan 27, 2010 13:51:57 GMT -5
How about this [/img]
|
|
|
Post by s3steve on Jan 27, 2010 13:59:45 GMT -5
How about this [/img] [/quote] I guess the LC on this one stands for Looks Cool! ;D ;D ;D Nice!!!
|
|
|
Post by rz350ypvs on Jan 27, 2010 14:10:58 GMT -5
That's an '83-'85 RZ tank. The top frame "loop" around the tank is the only thing that looks RZ on that frame. The down tubes on the stock RZ would probably interfere with the exhaust.
I do have an '83 frame Drew, but nothing else... it all went on the S1. That 350LC triple looks pretty sweet.
|
|
|
Post by drewski on Jan 27, 2010 14:27:51 GMT -5
That's an '83-'85 RZ tank. The top frame "loop" around the tank is the only thing that looks RZ on that frame. The down tubes on the stock RZ would probably interfere with the exhaust. I do have an '83 frame Drew, but nothing else... it all went on the S1. That 350LC triple looks pretty sweet. The LC is cool, but I love the GP-Style tank on that green Project. This is the CMR Racing Suzuki GT750 Kit. They are working on a similar H2R-style frame for the H2. Aluminum tank!! ;D This would be a wicked street bike! ;D Lots of "hoops to jump through" to get it licenced though!
|
|
|
Post by rz350ypvs on Jan 27, 2010 15:37:13 GMT -5
You took those pics at the international center show last year didn't you ;D I have an '86+ RZ tank that is similar to the green one.. I wonder if you could modify the frame on the H1 or H2 to use it.. Or modify the RZ frame for the H1 motor
|
|
|
Post by drewski on Jan 27, 2010 16:36:22 GMT -5
You took those pics at the international center show last year didn't you ;D Yes... I did!! I have an '86+ RZ tank that is similar to the green one.. I wonder if you could modify the frame on the H1 or H2 to use it.. Or modify the RZ frame for the H1 motor Now you're thinking like me!! That might be a really bad thing!! ;D I'm thinking that the Triple might be made to fit in a RZ frame! Or should I say the frame might be "adjusted" to allow the Triple to fit! ;D I'm guessing the front down tubes might be a close fit around the 1 and 3 cylinder exhaust pipes! They seem to be wider apart than the Kawi frame. BTW, I'm thinking H2 in that frame! ;D The wider engine might actually fit better! ;D ;D Still in the "Dreaming Stage"! If you get a minute, throw a tape measure on those down tubes of the frame you have, will ya David?! No rush!
|
|
|
Post by rz350ypvs on Jan 27, 2010 17:40:08 GMT -5
I was outside in the garage anyway.. the down tubes taper out slightly so it's hard to give an exact number. Where the exhaust pipes exit the cylinders on the RZ, the frame is about 8" from inside to inside. So about 9" center to center. For fun I measured my H1 motor and it was about 10" from the center of the exhaust port from 1-3. It doesn't look good.. unless the H2 motor is a lot wider
|
|