|
|
Post by Scott on Sept 23, 2007 16:57:28 GMT -5
Hi Guys,
I had to pop the right engine cover to rebuild my clutch. Needless to say I need a new gasket. Any suggestions as to where I can get a gasket set ... eBay aside. Maybe a local (Southwestern Ontario) place?
Thanks,
Scott
|
|
|
|
Post by zambia on Sept 23, 2007 17:41:24 GMT -5
Scott, you can get them through NH Cycle..it won't be any cheaper than eBay though, H2 sets for Vesrah are only $23. But if you're considering a rebuild, Jeff at NH knows his stuff (regarding cranks).
ian
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 23, 2007 18:46:56 GMT -5
Reproduction decals has a complete set for $26.17USD. plus shipping. He is in Southern Ontario, so receiving the gaskets should not take to much time. www.reproductiondecals.com/default_frameset.html?content.html~mainThe Gasket manufacturer is "Vesrah" Kawasaki VG-422 Article no 608-665. This gasket set has all the gaskets you need for the H2 engine. Your local motor cycle store should be able to get them too. brawney  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 24, 2007 6:44:13 GMT -5
|
|
|
|
Post by Scott on Sept 24, 2007 10:31:54 GMT -5
Thanks for the tips guys ... Scott
|
|
