|
Post by rz350ypvs on Oct 28, 2008 23:42:55 GMT -5
I need to get new wheel bearings and seals for the RZ350 wheels I'm using, does anyone know where I can get any in the GTA? I also need crank bearings for my H1 motor. Can I get these at any bearing supplier?
|
|
|
Post by JA-Moo on Oct 29, 2008 11:38:25 GMT -5
I need to get new wheel bearings and seals for the RZ350 wheels I'm using, does anyone know where I can get any in the GTA? I also need crank bearings for my H1 motor. Can I get these at any bearing supplier? Look up HVC on Google for Yammi parts. And The H1 crank bearings are pretty much standard, you will need C3 rated bearings. There is one with a lock groove that might be hard to find.
|
|
|
Post by tripletriplenut on Oct 29, 2008 11:46:17 GMT -5
i can get you the crank bearings. inner and outter seals you can get from reprodution decals on this board.Who you going to use for the crank rebuild?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 29, 2008 11:50:46 GMT -5
CBS Bearing for wheels, 7 dollars each
|
|
|
Post by rz350ypvs on Oct 29, 2008 13:10:22 GMT -5
Forgot about them... They don't list RZ350 bearings. I bet they would have them though.
How much does a set of bearings usually cost? I have a guy in Toronto that does my Yamaha boring/ crank rebuilding. I already bought a gasket set and crank/engine oil seals from Andre.
Found a local store, ever heard of BDI?
|
|
|
Post by givr on Oct 29, 2008 13:14:06 GMT -5
I've got a spare set of new bearings. PM sent.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 29, 2008 13:32:19 GMT -5
I already bought a gasket set and crank/engine oil seals from Andre. Those seal kit's only have the outer 2 seals for the crank, you need the inners as well
|
|
|
Post by Walms on Oct 29, 2008 14:12:37 GMT -5
Found a local store, ever heard of BDI? For work, we use Canadian Bearing (most expensive), BDI (middle of the road), Toronto Bearings (cheapest)
|
|
|
Post by reprodecals on Oct 29, 2008 14:34:44 GMT -5
David,
I can order you RZ350 wheel bearing kits for both wheels.
- front wheel bearing and seal kit for about $20. Includes 2 bearings and 2 seals. - rear wheel bearing and seal kit for about $30. Includes 3 bearings and 2 seals.
If I don't have it listed, I can often source it. PM me if interested.
Andre
|
|
|
Post by rz350ypvs on Oct 29, 2008 14:35:44 GMT -5
I am pretty sure it does have all the crank seals.. there are 5 large seals that were in the kit, and 1 is the countershaft seal.
Do you think these would be Ok for the wheel bearings?
|
|
|
Post by reprodecals on Oct 29, 2008 14:54:17 GMT -5
I make up special kits when they are not offered that way. In some cases I get the standard engine seal kits and add the inner crank seals to make a complete set.
I also make up some of my own tune up kits, petcock rebuild kits and other stuff. I think complete kits make life a lot easier.
I think you did get the big H1 seal kit with everything David. If you didn't, let me know. I have the 2 inner seals available separately.
|
|
|
Post by rz350ypvs on Oct 29, 2008 15:20:39 GMT -5
Thanks Andre. I am sure I have the inner crank seals with the kit. Are those prices in USD? I may check out the local bearing place. I bet they won't have the seals though. I will most likely end up getting them from you. I think my dad wants new steering head bearings for his CB750 and 450 too.
|
|
|
Post by reprodecals on Oct 29, 2008 15:54:40 GMT -5
Thanks Andre. I am sure I have the inner crank seals with the kit. Are those prices in USD? I may check out the local bearing place. I bet they won't have the seals though. I will most likely end up getting them from you. I think my dad wants new steering head bearings for his CB750 and 450 too. Yes all of the prices are USD. It's a bummer about the CAD. I'm buying all of our parts in USD as well, so I'm feeling it too. No problem with the steering head bearings for your dad's CB750 & CL450. According to my books, both bikes use the same tapered roller steering head bearing sets. Have a look and see if you find the RZ bearings locally. If they don't have the seals, and yours are reusable, just do the bearings. Just wanted to let you know I could supply them if you need them.
|
|
|
Post by givr on Oct 29, 2008 17:19:40 GMT -5
The dollar rebounded 4.5 cents today! Biggest single gain in years. Quick! Place your orders! ;D
|
|