Post by pocharrier17 on Mar 19, 2024 6:32:48 GMT -5
hi everyone.
i'm just finishing the reassembly of my kh500, i have a lot of problems with the oil system.
I'd love to hear your opinions.
i bought new springs and balls for the check valves.
when i test them with air they all start to leak slowly from 3 psi and open at 4.8 (i use a glass of water to see if there are bubbles), when i test them with 2 stroke oil they don't leak even after 10 minutes and open at 4.8.
i'm a bit confused knowing from what i understand it should be able to maintain pressure no matter if it's oil or air.
can i consider the test as conclusive, do you think they can be used like that?
thank you for your reply
i'm just finishing the reassembly of my kh500, i have a lot of problems with the oil system.
I'd love to hear your opinions.
i bought new springs and balls for the check valves.
when i test them with air they all start to leak slowly from 3 psi and open at 4.8 (i use a glass of water to see if there are bubbles), when i test them with 2 stroke oil they don't leak even after 10 minutes and open at 4.8.
i'm a bit confused knowing from what i understand it should be able to maintain pressure no matter if it's oil or air.
can i consider the test as conclusive, do you think they can be used like that?
thank you for your reply
