|
|
H1 clutch
Nov 25, 2023 14:54:15 GMT -5
via mobile
Post by gsxrtriple1 on Nov 25, 2023 14:54:15 GMT -5
If the clutch is dragging and hard to get in neutral at stand still do i turn the acuter screw Inwards or outwards a little when reading different articles some say after cable adjustment on lever and midway adjuster turn screw until you feel resistant and other say turn screw in until resistant and then back out 1/4of aturn
|
|
|
|
Post by kawonda750 on Nov 25, 2023 16:28:37 GMT -5
If it is dragging and hard to get into neutral, you need a bit more clutch. Turn the screw in a bit more. Make sure you have a little play at the lever.
BTW, H1s are notorious for being hard to get into neutral when stopped. Many of us have learned to switch into neutral while still moving.
|
|
|
|
H1 clutch
Nov 25, 2023 18:43:36 GMT -5
via mobile
Post by gsxrtriple1 on Nov 25, 2023 18:43:36 GMT -5
Ok thanks I will try that in the morning
|
|
|
|
H1 clutch
Dec 20, 2023 13:25:54 GMT -5
via mobile
Post by gsxrtriple1 on Dec 20, 2023 13:25:54 GMT -5
After a few attempts I've now got a pretty good clutch I can sometimes get it in to neutral so I reckon with a bit of tweaking it will be a bit better
All thou I had cleaned the plates they still seamed to be sticking so I cleaned and dried them and I think this helped
|
|
