GT550 baffles

[kawonda750]

Just on the off chance... I need a whole set of Gt550 baffles. I got a pretty good original set of pipes with the bike but no baffles. ebay wants 2 arms and a leg... what a surprise.

[zambia]

Nov 18, 2023 13:46:47 GMT -5 kawonda750 said:

Just on the off chance... I need a whole set of Gt550 baffles. I got a pretty good original set of pipes with the bike but no baffles. ebay wants 2 arms and a leg... what a surprise.

Gonna be hard to find, I think. I would get a cheap baffle that fits at the end of the pipe and then tack a pipe onto it (with a bunch of drilled holes), to make up the correct length.

fortnine.ca/en/drag-specialties-baffle-for-drag-specialties-exhausts-ds202019?utm_id=71546087880&utm_campaign=1768282015&utm_source=google&utm_medium=paid&utm_content=342570873497&gad_source=1&gclid=Cj0KCQiA3uGqBhDdARIsAFeJ5r0ONdrg6iBVA4_gp_by1p2N2UI9gUx7wIoPvDE96TVwu2kb8CvUyFoaAplOEALw_wcB

[Walms]

I'm a hack, so I made baffles from copper water pipe that happened to fit perfectly. I made tabs to hold them in by soldering some smashed copper pipe that was bent into little L brackets. They worked perfectly, didn't break, they were hidden from view and the spooge covered the tips.
Yeah, I know it's a hack, but fugg it, better to be mobile... lol

[kawonda750]

Yes. I am looking for the actual dimensions from the Suzuki board. There are a few universal baffles available. Otherwise there are some crappy, rusty pipes on ebay. I will see if the sellers will sell me the pipe but only send the baffle. One heck of a lot cheaper than dealing with machiv motors. Freakin bandits...

[42sixHemi]

Hi DAve

Do you know the Part # i can check my NOS suzuki parts for some

Andy

[kawonda750]

14510-34000 x2
14510-36100 or 14510-26000 x2

[autofobe]

I think you are on the wrong board this is a Kawasaki triple board!
Look at me I don’t even own a triple any more.
Do you have any Idea what the baffle hole in the end of the pipe size is.
I know there are some old Suzuki triple pipes at the scrap yard here
But not sure if they are 380 or 550.
The other problem is I’m heading to Florida on Sat and don’t know if I will get over there before I go.
I will be back mid Jan if you are not in a hurry.
Brad

[kawonda750]

Yes. The big ones are 38 mm and the inner tube is about 19 mm.

Smaller ones for the centre are 30 mm

I am on Suzuki boards asking too. Andy said that he may have some Suzi parts so that is the reason I put this up. You never know who has stuff hoarded away...