Syd
2nd Gear
Posts: 189
|
Post by Syd on Apr 11, 2020 15:45:34 GMT -5
Hello,
Can anyone advise what should the typical carb slide height be at idle on a stock standard Kawasaki H1B? Thanks
|
|
Johnny O
2nd Gear
Ride it like you stole it !!!!!!!!
Posts: 334
|
Post by Johnny O on Apr 11, 2020 21:55:50 GMT -5
If you set the slide height with the idle screws with a number 5 drill bit under the slides it should be close,,, or 5mm... don’t forget to also sync your slides after... Cutaway on the slides facing air box .
|
|
Syd
2nd Gear
Posts: 189
|
Post by Syd on Apr 12, 2020 4:50:44 GMT -5
Great, thanks for the info - Happy Easter
|
|
|
Post by Curtis on Apr 12, 2020 8:02:42 GMT -5
If you set the slide height with the idle screws with a number 5 drill bit under the slides it should be close,,, or 5mm... don’t forget to also sync your slides after... Cutaway on the slides facing air box . Also equivalent to a 13/64 (approximately) if you don’t have number drill bits
|
|
Syd
2nd Gear
Posts: 189
|
Post by Syd on Apr 13, 2020 5:40:09 GMT -5
Thanks Curtis
|
|