|
|
Post by tdub56 on Nov 5, 2018 11:46:57 GMT -5
Hey guys,
Looking for guidance on painting the letters on my controls.
Left side I think it goes white for the low beam, high beam, indicator arrows and horn button. With the parking one left black since its not there on Canadian models.
Right side I think its just white for lights on off and red for kill switch off on off. The PO and S stay black because they aren't there.
Correct?
|
|
|
|
Post by mraxl on Nov 5, 2018 13:59:00 GMT -5
Hey guys, Looking for guidance on painting the letters on my controls. Left side I think it goes white for the low beam, high beam, indicator arrows and horn button. With the parking one left black since its not there on Canadian models. Right side I think its just white for lights on off and red for kill switch off on off. The PO and S stay black because they aren't there. Correct? |
|
|
|
Post by tdub56 on Nov 5, 2018 14:26:50 GMT -5
Jeez, everything really is on there. I must have missed it this morning when I was poking around. Thanks!
|
|
|
|
Post by III on Nov 5, 2018 20:56:11 GMT -5
Jeez, everything really is on there. I must have missed it this morning when I was poking around. Thanks!
 |
|
|
|
Post by tdub56 on Nov 6, 2018 7:02:37 GMT -5
bahahah
|
|
|
|
Post by crazycunuc on Nov 6, 2018 9:31:34 GMT -5
Tdub.. If you need any tips for the "how to" process here's a good video to help out. i also went into a bit more detail on my recent KH400 build thread on this board.
|
|
|
|
Post by tdub56 on Nov 6, 2018 9:40:18 GMT -5
Thanks!
|
|
|
|
Post by tdub56 on Nov 11, 2018 18:35:30 GMT -5
A follow up to this, I'm wondering if any of you have an idea about where the tiniest spring in the world could have come from. It's even smaller than the springs in the kill switch assembly. All the other switches seem to have the correct springs so I'm at a loss. I don't have a pic yet but it's just the tiniest thing you've ever seen. I don't think it could go anywhere besides in the switch housing.
|
|
|
|
Post by 42sixHemi on Nov 11, 2018 20:18:55 GMT -5
Is it from behind your Knob contact?
|
|
|
|
Post by crazycunuc on Nov 12, 2018 8:12:53 GMT -5
hmm... It's hard to tell without the picture yet but maybe for the horn button... or like 42sixHemi says knob contact.
|
|
|
|
Post by tdub56 on Nov 12, 2018 8:47:22 GMT -5
Here's a pic. See how tiny it is? Next to it is the kill switch, I have all three springs in there already. Can't for the life of me think where such a small spring would be.  2012 mercedes s550 0 60 |
|
|
|
Post by tdub56 on Nov 16, 2018 8:28:54 GMT -5
Any ideas on the tiny spring?
|
|
|
|
Post by 42sixHemi on Nov 16, 2018 12:54:26 GMT -5
i'LL SEE IF I HAVE A USED ONE TO TAKE APART AS SEE WHAT IT REVELS
|
|
|
|
Post by hoser on Jul 23, 2019 2:20:20 GMT -5
Possibly part of steering lock.
|
|
|
|
Post by tdub56 on Jul 23, 2019 5:42:25 GMT -5
I never did find it, I think you may be right, could be one of the springs from the seat lock too.
Controls came out great afterwards. Used a small syringe to fill the letters.
|
|
