|
Seca
Oct 10, 2018 18:18:19 GMT -5
via mobile
JA-Moo likes this
Post by daffey1 on Oct 10, 2018 18:18:19 GMT -5
|
|
|
Post by Walms on Oct 10, 2018 19:41:51 GMT -5
damn, I’m loving the work you did on the tail section Fred, that turned out fantastic! A project not for the faint of heart! 😎
|
|
|
Seca
Oct 11, 2018 4:33:02 GMT -5
via mobile
Post by daffey1 on Oct 11, 2018 4:33:02 GMT -5
Thanks Walms, the body is all paint, no decals, except for the “Only the Few” decal. I did it with rattle can paint in the basement, then had a clear coat put over the top. I hope to have the motor finished this winter. The frame has been shortened 6” as well.
|
|
|
Seca
Oct 11, 2018 6:55:36 GMT -5
Post by crazycunuc on Oct 11, 2018 6:55:36 GMT -5
Very cool!! That's also quite a good looking paint job for rattle can...great job! What's that tail section? I'm guessing something custom?
|
|
|
Seca
Oct 11, 2018 14:38:59 GMT -5
via mobile
Post by daffey1 on Oct 11, 2018 14:38:59 GMT -5
It’s the stock Seca tail. I just turned it into a solo seat/tail section. It will house my battery and fuse box.
|
|
|
Seca
Oct 11, 2018 14:53:16 GMT -5
via mobile
Post by daffey1 on Oct 11, 2018 14:53:16 GMT -5
Here’s a couple more of my turbo mock up.
|
|
|
Post by Curtis on Oct 11, 2018 18:51:24 GMT -5
You could help with reversion by adding a slap flapper to that exhaust
|
|
|
Seca
Oct 12, 2018 4:39:20 GMT -5
via mobile
Post by daffey1 on Oct 12, 2018 4:39:20 GMT -5
🤣🤣🤣🤣🤣🤣 NO!!!
|
|
|
Seca
Oct 12, 2018 18:28:25 GMT -5
via mobile
Post by Curtis on Oct 12, 2018 18:28:25 GMT -5
Your loss in horsepower 😉
|
|
|
Seca
Oct 13, 2018 13:53:38 GMT -5
via mobile
Post by daffey1 on Oct 13, 2018 13:53:38 GMT -5
🤣🤣 I’ll take my chances 😉👍
|
|