|
|
Post by kawonda750 on Oct 5, 2018 15:24:24 GMT -5
I am impatient waiting for an ignition switch. If I use a jumper wire , according to the wiring diagram, the white and brown go together for on. When I do this, I get the neutral light but no spark. Do I need another to power the ignition? Ignition is shown as bl/wh and ground blk/yellow but under "off"
|
|
|
|
Post by shiloh on Oct 5, 2018 16:25:05 GMT -5
On... wh to br, wh is batt br is coil
Blu to r/w is head lite/tail lite
|
|
|
|
Post by kawonda750 on Oct 6, 2018 6:45:23 GMT -5
I saw that Perry and did br to white. I did not light up the charge lite , only the neutral lite.
|
|
|
|
Post by mraxl on Oct 6, 2018 7:16:12 GMT -5
To get spark just disconnect the white wire at the CDI box.
If you put 12v on that wire it will destroy the CDI.
No battery power is needed for spark.
If the engine is started there will be no way to stop it unless choked or stalled.
|
|
|
|
Post by kawonda750 on Oct 6, 2018 7:36:59 GMT -5
thanks Dale
|
|
|
|
Post by shiloh on Oct 6, 2018 8:00:34 GMT -5
Put in a toggle switch basic on off.
Thats how I wired my 72. I put the switch under the seat, switch off kills ignition.
|
|
|
|
Post by kawonda750 on Oct 7, 2018 12:30:06 GMT -5
I am getting a switch this week.
|
|
|
|
Post by Jim on Oct 7, 2018 15:15:14 GMT -5
The black wire with the white stripe, Dale.
|
|
|
|
Post by kawonda750 on Oct 8, 2018 6:59:37 GMT -5
That makes a difference
|
|
