|
Post by autofobe on Jun 6, 2018 19:06:07 GMT -5
depends if its a big bear(high pipe) scrambler or a low pipe.The low pipes are the same as the yds3 250. Brad
|
|
|
Post by Curtis on Jun 6, 2018 19:38:39 GMT -5
Would be nice to put an original GYT Kit on.....
|
|
|
Post by kawonda750 on Jun 7, 2018 5:53:42 GMT -5
|
|
|
Post by autofobe on Jun 7, 2018 6:01:56 GMT -5
Hey Dave,I would sell the yds3 for $1000. if your interested.There is no ownership,needs a total restore. Brad
|
|
|
Post by III on Jun 7, 2018 6:42:01 GMT -5
Tried that several times Dave, all junk like the ones he already has Anyone know of a set of chambers???
|
|
|
Post by Curtis on Jun 7, 2018 11:40:02 GMT -5
Tried that several times Dave, all junk like the ones he already has Anyone know of a set of chambers??? I have a set of plans somewhere here if he wants to roll and weld his own
|
|
|
Post by kawonda750 on Jun 22, 2018 6:56:36 GMT -5
Well, luck has hit again. I got an email from the guy who had the YM1 I was going to buy. He had a roller but only half a crankcase and no transmission. He said that there was a YM1 engine on kijiji. I got in touch with the engine guy and bought it , full engine, carbs and transmission then got back in touch with the owner of the roller and said I could now take that bike. He then tells me that he has sold the coils, carbs, battery box, wiring harness and a few other things. What a dick. He tells me this after. So, I now have an engine with nothing to put it in. I will be looking.....
|
|
|
Post by Curtis on Jun 22, 2018 18:37:11 GMT -5
Low ball him on the roller then
|
|
|
Post by kawonda750 on Jun 23, 2018 6:54:51 GMT -5
Then I have to go looking for complete electrics and a battery box. Which may not be a bad idea I guess
|
|
|
Post by autofobe on Apr 26, 2021 20:38:06 GMT -5
Hey Dave,you ever find a frame for that 305? I finally got around to working on the yds3. Frame powder coated,freshly rebuilt motor in the frame.Now for the rest of the rusty bits. Brad
|
|
|
Post by kawonda750 on Apr 27, 2021 12:26:57 GMT -5
No Brad. Dumped it a couple years ago.
|
|