|
Post by kawonda750 on Jun 4, 2018 6:15:52 GMT -5
I am taking a shot that someone will know someone. I am looking for a Yamaha 305 YM 1 engine or at least a whole bottom end cases , transmission crankshaft etc. I do have cylinders and heads. Please let me know.
|
|
|
Post by Curtis on Jun 4, 2018 6:27:29 GMT -5
Brad (autofobe) used to have some....
|
|
|
Post by autofobe on Jun 4, 2018 18:48:41 GMT -5
Hey Dave,Did you buy that down Niagara falls way.I was suppose to pick it up but never got round to it.To far and to busy. Brad
|
|
|
Post by kawonda750 on Jun 5, 2018 5:50:04 GMT -5
No Brad. Chatham. I also guess that you don't have a bottom end for it. Could you find a number for the one in Niagara?
Thanks
|
|
|
Post by autofobe on Jun 5, 2018 6:35:16 GMT -5
I have a yds3 and some yds5 cases cranks,race trans,and race cyl. Is yours the early one with the clutch on the crank?I will look for the guys number. Brad
|
|
|
Post by autofobe on Jun 5, 2018 6:50:58 GMT -5
sorry Dave I didnt get his number George Gallant is his name. was in St. Catharines Brad
|
|
|
Post by kawonda750 on Jun 5, 2018 18:28:46 GMT -5
I talked to George. He sold the bike 2 weeks ago.
|
|
|
Post by kawonda750 on Jun 5, 2018 18:30:14 GMT -5
I haven't bought the bike yet but won't if I can't find a bottom end. I do like those Yamahas though.
|
|
|
Post by kawonda750 on Jun 5, 2018 18:37:45 GMT -5
I have a yds3 and some yds5 cases cranks,race trans,and race cyl. Is yours the early one with the clutch on the crank?I will look for the guys number. Brad Hi Brad Since I need a whole bottom end including cases, crankshaft, transmission etc. I guess it doesn't matter what year. If you have a complete bottom, I am interested. Basically, I have only cylinders and heads with only one left case and a rusty tranny which maybe I can save.
|
|
|
Post by kawonda750 on Jun 5, 2018 18:57:42 GMT -5
Apparently, it's a 65 btw.
|
|
|
Post by autofobe on Jun 6, 2018 15:47:41 GMT -5
Ya the the 65 ym1 uses the same cases as the yds3 and maybe trans but it has a different crank because of the 54 stroke.You clutch is on the crank like the yds3.The yds3 only has a 50 stroke.Your top end wont fit a yds3 bottom end because of the shorter stroke.The ym2 and ym2c and the yds5 all moved the clutch the trans in 1967.The cranks & cases I have are for a td1c or yds5.Wont work for you.
|
|
|
Post by kawonda750 on Jun 6, 2018 15:49:07 GMT -5
OK, thanks Brad. I am going to pass on this bike now.
|
|
|
Post by III on Jun 6, 2018 15:56:02 GMT -5
Frank has a 65 I believe, its a 305 and he has been searching for pipes for it forever. Any ideas you Yammy guys???
|
|
|
Post by kawonda750 on Jun 6, 2018 18:27:42 GMT -5
There are some on ebay right now. I found them while looking for an engine.
|
|
|
Post by III on Jun 6, 2018 18:34:34 GMT -5
There are some on ebay right now. I found them while looking for an engine. Got a link Dave???
|
|