|
|
Post by crazycunuc on Feb 5, 2018 12:00:04 GMT -5
Hey guys,
Just curious how the original rear turn signals on the H2 were grounded. I've got the NOS stems, single wire reproduction lights and the Diablo rubber mounting kit.
I've seen kits which include a spring for between the stem and outer chrome cap. Do I need one of those to make the connection from the stem to the bolt?
Thanks
Peter
|
|
|
|
Post by III on Feb 5, 2018 12:49:38 GMT -5
Hey guys, Just curious how the original rear turn signals on the H2 were grounded. I've got the NOS stems, single wire reproduction lights and the Diablo rubber mounting kit. I've seen kits which include a spring for between the stem and outer chrome cap. Do I need one of those to make the connection from the stem to the bolt? Thanks Peter For some reason Pete Im remembering both a green and a grey wire running to the blinker stems. Then again both my H2s were 74 not 72 models. |
|
|
|
Post by crazycunuc on Feb 5, 2018 13:16:59 GMT -5
I think the late models are different... could be wrong. These are what are in my harness to the tail section. Which makes sense with looking at my diagram   |
|
|
|
Post by H2 Dude on Feb 5, 2018 13:22:36 GMT -5
There was an eyelet that attached to the stem nut and male end plugged into the harness. My H1B,H2B and S2A are the same.
|
|
browney
2nd Gear
Goin' Crazy Wanna Come............
Posts: 361 
|
Post by browney on Feb 5, 2018 15:41:42 GMT -5
|
|
|
|
Post by Jim on Feb 5, 2018 17:17:00 GMT -5
Mine did, but I would have sworn they're brass. Maybe I'm wrong though. |
|
|
|
Post by crazycunuc on Feb 5, 2018 17:22:52 GMT -5
Where would those go on the rear signals? I do have a couple kicking around..
|
|
browney
2nd Gear
Goin' Crazy Wanna Come............
Posts: 361
|
Post by browney on Feb 5, 2018 20:00:28 GMT -5
That's A Good Question.  I Looked On The Kawi Site and They Are Missing The Pictures In Their Parts Section For The Turn Signals. Maybe Someone Could Chime In With A Nice Parts Diagram For The Rear Turn Signals? To Give You An Idea. browney out  |
|
|
|
Post by III on Feb 5, 2018 20:53:40 GMT -5
That's A Good Question. I Looked On The Kawi Site and They Are Missing The Pictures In Their Parts Section For The Turn Signals. Maybe Someone Could Chime In With A Nice Parts Diagram For The Rear Turn Signals? To Give You An Idea. browney out Thought maybe this old build thread would show them... NOPE Not where to put them anyway..... H2 Assembly |
|
|
|
Post by III on Feb 5, 2018 21:02:42 GMT -5
linkAnother diagram not showing the small clips....
|
|
|
|
Post by crazycunuc on Feb 5, 2018 21:06:50 GMT -5
I originally thought they were for the front signals on H2B/C... but who knows
|
|
|
|
Post by III on Feb 5, 2018 22:35:05 GMT -5
I originally thought they were for the front signals on H2B/C... but who knows Front stalks go into rubber grommets in headlight holder, ears. Metal collar inside bucket grounds the stalk to the frame. Dont recall ever seeing those rigs in there though Peter. |
|
browney
2nd Gear
Goin' Crazy Wanna Come............
Posts: 361
|
Post by browney on Feb 5, 2018 22:43:21 GMT -5
Looks Like it goes on both sides of the round grommet and when you tighten the bolt against the cupped chrome washer it makes contact with the two sides of the ground clip to complete the ground. browney out  |
|
browney
2nd Gear
Goin' Crazy Wanna Come............
Posts: 361
|
Post by browney on Feb 5, 2018 22:45:39 GMT -5
Nice Pics Steve. I will Have To Save Them For Future Reference. browney out |
|
|
|
Post by crazycunuc on Feb 5, 2018 23:21:03 GMT -5
Browney to the rescue!
Thanks!
|
|
