|
|
Post by kawonda750 on Dec 18, 2017 9:27:19 GMT -5
LC told me about this place. Rectifiers for older bikes . Brand new and guaranteed. Really cheap too.
oregonmotorcycleparts.com
|
|
|
|
Post by H2 Dude on Dec 18, 2017 11:00:54 GMT -5
I put a new rectifier & reg on H1B from oregonmotorcycleparts.com ..works sooo much better
|
|
|
|
Post by kawonda750 on Dec 18, 2017 11:34:18 GMT -5
Glad to hear that Ian. I asked about a regulator too.
|
|
|
|
Post by Jim on Dec 18, 2017 12:08:30 GMT -5
H1 Dude, please post the part number(s) when you get a minute. I often refer guys who call me trying to buy those parts to Oregon, but I've never given them specifics of the parts to get.
|
|
|
|
Post by kawonda750 on Dec 18, 2017 12:20:50 GMT -5
Early H1 rectifier is R255a6 Jim. I see that the regulators are the same as H1B. I will post that when he gets back to me.
|
|
|
|
Post by kawonda750 on Dec 18, 2017 12:24:43 GMT -5
$55 , kind of beats the $299 US for an NOS one on ebay. And lifetime warranty.
|
|
|
|
Post by kawonda750 on Dec 19, 2017 6:46:27 GMT -5
I put a new rectifier & reg on H1B from oregonmotorcycleparts.com ..works sooo much better Do you have the regulator Ian?? |
|
|
|
Post by kawonda750 on Dec 19, 2017 17:21:01 GMT -5
I put a new rectifier & reg on H1B from oregonmotorcycleparts.com ..works sooo much better Did you have to give up the warning light Ian? I asked about a regulator but he said I would have to give up the warning light but could use the less expensive R255a rectifier. |
|
|
|
Post by H2 Dude on Dec 20, 2017 1:38:52 GMT -5
Sorry guys been busy..I think thats the rectifier I used Dave ,no provision for the blue wire.H1B doesn't need it anyway.
Can't for the life of me what the Reg # was..I can't even find the paper it came with...lol
I suspect it was the VR3 for the Kz 400. he can verify that.
what i did was,I cut the wires off an old crappy reg I had then soldered them together so i could use the original connector.
|
|
|
|
Post by H2 Dude on Dec 20, 2017 11:57:52 GMT -5
Ok while cleaning up my desk I found the Regulator sheet.
It is a VR3-U
|
|
|
|
Post by Jim on Dec 20, 2017 13:01:39 GMT -5
OK thanks, I have:
Early H1 Regulator: VR3U $55.50
Early H1 Rectifier: R255A6 $55.00
I'll pass this on when someone calls me to buy the early H1 regulator or rectifier, which I don't make (since Oregon sells them reasonably).
|
|
|
|
Post by kawonda750 on Dec 20, 2017 16:41:16 GMT -5
Early H1 rectifier Jim
|
|
|
|
Post by Jim on Dec 20, 2017 17:36:20 GMT -5
Oops typo, thanks.
|
|
