|
Post by hunleysfriend on Nov 28, 2017 21:46:11 GMT -5
Those two screen filters found at the inlets (main & reserve) of the petcock that aren’t found in the rebuild kit I bought. Anyone have a good source for those filters? Appreciate it folks.
|
|
|
Post by III on Nov 28, 2017 23:56:31 GMT -5
Those two screen filters found at the inlets (main & reserve) of the petcock that aren’t found in the rebuild kit I bought. Anyone have a good source for those filters? Appreciate it folks. Old news that can be found in the invaluable resource site. The filters for the standpipes are a Suzuki part. Be sure to use the information that ia always as close as your computer for stuff like this. Petcock PartsPartzilla has them
|
|
|
Post by hunleysfriend on Nov 29, 2017 6:41:14 GMT -5
Thank very much for the info. While I tried the search, it seems the only word I got right was “petcock”. Various unrelated results with that.
|
|
|
Post by trevors78kh400 on Nov 29, 2017 17:58:29 GMT -5
Hello Hunleysfriend I had a hard time getting the right ones for my 78 kh400. I modified the 500 filters they are a little bigger but i didn't like them so I went to inline filters instead but kept the tubes on the petcock. Cheers Trevor
|
|
|
Post by hunleysfriend on Nov 29, 2017 20:12:22 GMT -5
Yes. I bought those and they won’t work without rigging them. I’ve got in lines already but wanted the added factory protection. I’ll keep looking. Thanx.
|
|
|
Post by trevors78kh400 on Nov 30, 2017 20:37:04 GMT -5
Pm me if you ever find any that fit I would also like them. Trevor
|
|
|
Post by III on Nov 30, 2017 21:38:48 GMT -5
Pm me if you ever find any that fit I would also like them. Trevor Those Suzuki mesh screen filter deals didnt fit??? Aren't the pipes the same diameter as the H1 carbs have? They fit fine on my 500 carbs....
|
|
|
Post by mraxl on Dec 1, 2017 12:41:48 GMT -5
Pm me if you ever find any that fit I would also like them. Trevor Those Suzuki mesh screen filter deals didnt fit??? Aren't the pipes the same diameter as the H1 carbs have? They fit fine on my 500 carbs.... S series is smaller diameter.
|
|
|
Post by III on Dec 1, 2017 18:41:45 GMT -5
Those Suzuki mesh screen filter deals didnt fit??? Aren't the pipes the same diameter as the H1 carbs have? They fit fine on my 500 carbs.... S series is smaller diameter. And I am guessing no one has found a suitable one for the smaller pipes??? I tried Suzuki via Partzilla but it seems almost all the smaller bikes had similar carbs to the ones the larger screens fit, like the H1 size.
|
|
|
Post by crazycunuc on Dec 7, 2017 23:05:46 GMT -5
I was on Diablo Cycle's site today and they had some. Not sure if theirs will fit the KH. Might be worth checking out
|
|
|
Post by hunleysfriend on Feb 23, 2018 16:28:29 GMT -5
After buying a few incorrect filters I might just go with an aftermarket petcock which really breaks my heart. Just rebuilt the OEM hoping to save some $$$.
Emgo or other. Any suggestions you’ve had personal experience with would be appreciated.
|
|
|
Post by autofobe on Feb 24, 2018 8:03:09 GMT -5
Why not just use the mini in line filters? is this a trailer queen or you going to ride it?
Brad
|
|
|
Post by hunleysfriend on Feb 28, 2018 7:52:25 GMT -5
So you don’t know where I can get these either eh Brad? I went with a reproduction piece. Oddly the filters on this new unbranded unit seem to fit my original.
|
|