|
Post by crazycunuc on Nov 2, 2017 12:01:06 GMT -5
|
|
|
Post by zambia on Nov 2, 2017 15:42:53 GMT -5
Nice job! What shape was the diaphragm and the 4 hole gasket in?
|
|
|
Post by sf on Nov 2, 2017 15:51:50 GMT -5
Looks great...man that was clogged full. Is that a crack in the brass tube? what are you using in your ultrasonic?
|
|
|
Post by crazycunuc on Nov 2, 2017 16:14:35 GMT -5
There was no diaphragm but the 4 hole gasket was...ok. no cracks or anything so I re-used it.
After a few tests there were no leaks
|
|
|
Post by crazycunuc on Nov 2, 2017 16:55:07 GMT -5
Looks great...man that was clogged full. Is that a crack in the brass tube? what are you using in your8 ultrasonic? Thanks! Yeah, that tube is pretty beat..there are seceral cracks. I plan on sealing them up tonight. I forget what it's called but I'll take a look tomorrow at work and let you know
|
|
|
Post by crazycunuc on Nov 2, 2017 16:57:38 GMT -5
The lack of brass cage was really grinding my gears so I added a little piece of H2
|
|
|
Post by sf on Nov 2, 2017 17:09:40 GMT -5
If you want to replace I used some brass tube from a on line hobby store and pressed it in.
|
|
|
Post by crazycunuc on Nov 2, 2017 18:45:02 GMT -5
Really eh.... and it's just a press fit? No glue or anything?
|
|
|
Post by sf on Nov 2, 2017 20:47:40 GMT -5
K&S precision metals #8132 or #8133 can’t remember
|
|
|
Post by crazycunuc on Nov 2, 2017 21:24:29 GMT -5
Thanks!
|
|
|
Post by motocon on Nov 4, 2017 7:50:20 GMT -5
Where can I buy the replacement filters for the petcock
|
|
|
Post by mraxl on Nov 4, 2017 11:28:11 GMT -5
|
|
|
Post by motocon on Nov 4, 2017 23:33:00 GMT -5
Thank you 👍
|
|
|
Post by crazycunuc on Nov 6, 2017 8:08:23 GMT -5
Here's a super amateur video re-capping what I did to the tank/petcock
|
|
|
Post by motocon on Nov 6, 2017 22:21:32 GMT -5
Thanks for sharing the video.....the bike looks and sounds great!
|
|