|
Post by crazycunuc on Sept 1, 2017 7:40:22 GMT -5
Hey guys,
Just wondering if there are any tips/tricks for cleaning up the hubs/wheels and spoke on the H2 without dismantling everything.
The plan is to eventually replace the wheels/spokes with new chrome Repo's however to keep the current budget down I'm looking to clean my current original set for the time being. They're in pretty decent shape...just the typical oxidization etc..
Thanks
|
|
|
Post by givr on Sept 1, 2017 8:43:32 GMT -5
Scotchbrite pads and wd40. Follow up with nevrdull and an old t-shirt. It will take a while
|
|
|
Post by Jim on Sept 1, 2017 8:55:10 GMT -5
I had some luck with California Custom Aluminum Deoxidizer and their Purple Metal Polish, as a set of two bottles. The deoxidizer takes a little scrubbing, like with a toothbrush, but it's quicker than mechanical methods. The metal polish seems to be pretty much a wax to delay future oxidation, as well as a polish if you work at it hard enough.
|
|
|
Post by III on Sept 1, 2017 12:27:38 GMT -5
I had some luck with California Custom Aluminum Deoxidizer and their Purple Metal Polish, as a set of two bottles. The deoxidizer takes a little scrubbing, like with a toothbrush, but it's quicker than mechanical methods. The metal polish seems to be pretty much a wax to delay future oxidation, as well as a polish if you work at it hard enough. I loved the stuff Jim. Pricey but worth it I think.
|
|
|
Post by crazycunuc on Sept 1, 2017 12:31:38 GMT -5
I had some luck with California Custom Aluminum Deoxidizer and their Purple Metal Polish, as a set of two bottles. The deoxidizer takes a little scrubbing, like with a toothbrush, but it's quicker than mechanical methods. The metal polish seems to be pretty much a wax to delay future oxidation, as well as a polish if you work at it hard enough.
Where can I find this stuff...after a quick google search I only saw online vendors
|
|
|
Post by Jim on Sept 1, 2017 14:05:07 GMT -5
I don't know, I got mine online.
|
|
|
Post by crazycunuc on Sept 1, 2017 14:56:02 GMT -5
I looked and the website seems to be the best place. Just wanted to check 1st incase i could get it right away off the shelf
|
|