|
Post by captainpooby on Jul 22, 2017 7:05:28 GMT -5
I’m doing the rubber mount mod to my H2 cases and getting ready to cut the spacers. Does anyone have any advice on how tight, or how loose the spacers should be?
|
|
|
Post by shiloh on Jul 26, 2017 9:28:35 GMT -5
When I mounted my h1e engine the spacer tubes were a not too snug friction fit, 2 short outter ones and a filler middle, for the upper front and btms, rear hanger the same only I used one tube. Hope that helps.
|
|