|
Post by ballvo on Jan 6, 2017 13:43:35 GMT -5
I know there are a number of suspension swaps for the triples that are relatively straightforward but I can't remember any of them. Can anyone say whether an '88 FZ600 falls into that category?? Thanks. N.
|
|
|
Post by triplepoweredgpz on Jan 6, 2017 15:31:00 GMT -5
I'm about 90% that's what the mongrel is...pm drewski
|
|
|
Post by triplepoweredgpz on Jan 6, 2017 15:37:41 GMT -5
Hey guys! I was fooling around with the project today after I picked up the parts Zambia had for me (Thanks Lou and Ian! ) I don't know why I didn't clue in sooner, but I found that the FZR fork tubes are the same as the H2 tubes! so, that means they slide right into the H2 triple clamps! That inspired me to slide the FZR swinger into the H2 frame and... ta da...
|
|
|
Post by triplepoweredgpz on Jan 6, 2017 15:38:27 GMT -5
That was copied from the mongrel thread
|
|
|
Post by shiloh on Jan 6, 2017 15:53:33 GMT -5
I put a `94 cbr600 front end on my h1, pretty simple, just needed to track down the bearings. All balls has a conversion chart on their site.
|
|
|
Post by ballvo on Jan 6, 2017 16:32:55 GMT -5
Thanks guys. I'll check that mongrel thread. Reason I'm asking is that there's one available locally for not too many $$.
|
|