|
|
Post by tdub56 on Mar 29, 2016 6:36:05 GMT -5
Hi guys. This one has me pretty stumped. I took the handgrip off my old throttle tube, and its pretty clear that the new one (original looking repop) wont fit. I got them from Diablo, is there a specific grip I need to order for the weird plastic throttle tube on the H1E?
|
|
|
|
Post by Curtis on Mar 29, 2016 6:38:53 GMT -5
Just me being a smart ass, but did you get two left hand grips ?
|
|
|
|
Post by III on Mar 29, 2016 6:57:59 GMT -5
Just me being a smart ass, but did you get two left hand grips ? |
|
|
|
Post by tdub56 on Mar 29, 2016 7:09:39 GMT -5
Just me being a smart ass, but did you get two left hand grips ? You know, thats happened to me before. Back in 04 when I just got out of high school and was getting the KZ on the road, I ordered grips from Z1E, got two lefts and I thought there was something wrong with my bike, because I knew nothing at the time. |
|
|
|
Post by shiloh on Mar 29, 2016 7:14:26 GMT -5
A little soap and water and stretch that thing on..
When I did mine, I used pro grip gel grips, both the same dia, the throtle side was a bit tighter but went on with a little soapy lube.
|
|
|
|
Post by glh on Mar 29, 2016 7:21:14 GMT -5
I put the left side grip on my throttle tube because I just wanted something there for now
I just used a air blow gun under the edge
It is easy just blow it up like a ballon and slip it on
|
|
|
|
Post by tdub56 on Mar 29, 2016 7:32:11 GMT -5
But I have this one:  |
|
mouth
2nd Gear
Posts: 102
|
Post by mouth on Mar 29, 2016 8:44:28 GMT -5
I believe thats for the ol school style grips I just hacked the end off mine
|
|
|
|
Post by tdub56 on Mar 29, 2016 11:54:44 GMT -5
Can I just get a different throttle tube?
|
|
|
|
Post by zambia on Mar 29, 2016 12:54:00 GMT -5
Can I just get a different throttle tube? Yes - that is the easiest "fix" |
|
|
|
Post by tdub56 on Mar 29, 2016 12:57:30 GMT -5
Cool. Which models should I be looking for tubes from? Just other H1's?
|
|
|
|
Post by zambia on Mar 29, 2016 14:10:16 GMT -5
Cool. Which models should I be looking for tubes from? Just other H1's? I might have one...or are you looking for "new"? |
|
|
|
Post by tdub56 on Mar 29, 2016 14:23:00 GMT -5
Everything else is new but since you dont see this part I don't mind used.
|
|
|
|
Post by speedgeeza on Mar 29, 2016 18:24:43 GMT -5
That's the same type on my h2c resto, and it had the end cut down. Pretty sure it's original, but it's cracked anyway. Anybody got one going? The fiche shows different part numbers for '71 and '72.
|
|
|
|
Post by III on Mar 29, 2016 21:20:40 GMT -5
I have some here Tyler if nobody on your side of the line has one. I found a set of RH controls with the throttle and all yesterday as a matter of fact. You know your New Yawk connection is usually good when it needs to be. Gotta look out for folks on Da Rock.....  |
|
