|
|
Post by bolly on Dec 18, 2015 16:28:00 GMT -5
|
|
|
|
Post by zambia on Dec 18, 2015 16:37:01 GMT -5
You're really just buying the top end and tranny - It's $1000 for a rebuilt crank and a few hundred more for cases. Still, cylinders are getting hard to find... |
|
|
|
Post by bolly on Dec 18, 2015 17:51:01 GMT -5
Yep hopin it could be a good deal for somebody here
|
|
|
|
Post by triplepoweredgpz on Dec 18, 2015 19:35:37 GMT -5
If I had the extra money I'd probably pick it up, some time in the distant future...I want to attempt the "Henry" case Reed, it would be nice to start with a basket case...so I'm not destroying something useable
|
|
|
|
Post by pipe welder on Dec 29, 2015 7:54:33 GMT -5
If your thinking of buying on line without going to see these parts I had a look at this box of stuff yesterday. The cylinders and pistons are well used, ported, bored .040 over and some broken fins, and the fins on the intake side have been machined off to allow room for big carbs. The pistons are missing some rings. The Heads also have a lot of material machined away from the gasket surface to squish them down. The parts were most likely from a drag motor so I decided to pass. The transmission looked Ok but I could not verify that it is H2. The seller doesn't know a lot about the parts so he was making the assumption that its all H2. There are some other bits and pieces also some that are not H2.
|
|
browney
2nd Gear
Goin' Crazy Wanna Come............
Posts: 361 
|
Post by browney on Dec 29, 2015 11:01:50 GMT -5
Hi Jim. I was inquiring about those parts also. I received a text from him last night informing me of your findings and asking if I was still interested. I thanked the guy for his honesty and passed on the parts also. But I will give the guy credit as he told me no lies about the parts after he met with you. browney out  |
|
|
|
Post by pipe welder on Dec 29, 2015 17:29:45 GMT -5
Good to know there is still honest people out there.
He seemed to be a nice guy wt no bs.
Thanks for posting boly.
Always good to get a heads up on something we may need.
|
|
