Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 18, 2015 21:55:06 GMT -5
I rebuilt my b long ago. Soon as I put the rear wheel on I noticed the wheel offset. At that point I started a thread here titled "Crooked Little B" LC chimes in and informed me of the factory issue at hand
|
|
|
Post by nola on Jun 8, 2015 17:58:42 GMT -5
|
|
|
Post by Jackman on Jun 8, 2015 20:23:21 GMT -5
So clean WOW! Have you fitted your speedo cable?
|
|
|
Post by nola on Jun 9, 2015 0:36:56 GMT -5
So clean WOW! Have you fitted your speedo cable? The builder had to get one longer than stock..not sure how much longer. Cheers
|
|
|
Post by Jackman on Jun 9, 2015 5:45:38 GMT -5
The rotor can be mounted on the right side if you wanted it there the hub is drilled and tapped from factory, no need for a longer cable
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 9, 2015 6:30:09 GMT -5
I wish I had the patience .... Is thay why u never became a dr Dave? You didn't have the patients. Thats a fine looking proj Nola.
|
|
|
Post by nola on Jun 9, 2015 16:24:14 GMT -5
The rotor can be mounted on the right side if you wanted it there the hub is drilled and tapped from factory, no need for a longer cable I wanted to keep the caliper on the same side as stock.
|
|
|
Post by nola on Jun 9, 2015 16:24:50 GMT -5
I wish I had the patience .... Is thay why u never became a dr Dave? You didn't have the patients. Thats a fine looking proj Nola. Thanks, can't wait for it to be finished.
|
|
|
Post by nola on Jun 29, 2015 18:29:48 GMT -5
Not much progress as I'm still waiting for the crank, and top end work to be finished...but here's a couple with the rear cowl mounted....went to repro Oem shocks from Diablo untill I find, shocks that will fit...prob series 12 progressives...
|
|
|
Post by speedgeeza on Jun 29, 2015 19:17:45 GMT -5
I ordered a set on Ikon (modern day Koni) shocks last week. I wanted them an inch longer than standard so phoned the guy up and asked. He talked with the engineer who knew all about clearance issues with certain shocks before I even said a word. So this gave me a good vibe that at least they know their products. Available in all chrome too, so should look standard'ish.
|
|
|
Post by nola on Jun 30, 2015 14:45:15 GMT -5
I ordered a set on Ikon (modern day Koni) shocks last week. I wanted them an inch longer than standard so phoned the guy up and asked. He talked with the engineer who knew all about clearance issues with certain shocks before I even said a word. So this gave me a good vibe that at least they know their products. Available in all chrome too, so should look standard'ish. What's the model #? Like to have a look. Cheers
|
|
|
Post by speedgeeza on Jun 30, 2015 21:36:51 GMT -5
Here's a link to the different types. Their parts list shows 7610-1525SP8 for the H1 and H2. But when I spoke to the guy (Dave at ikon suspension usa), he said the engineer will use a different type as I wanted a custom (longer) build. Not home for a few weeks, by which time they should have been delivered, with a bit of luck. I can take a pic and post, if that helps... www.ikonsuspension.com/products/Forgot to add, your bike is looking sooo nice.
|
|
|
Post by nola on Jul 8, 2015 23:24:42 GMT -5
Little closer! URL=http://s470.photobucket.com/user/Nola75/media/Mobile%20Uploads/image_34.jpg.html] [/URL] Crank done Top end done URL=http://s470.photobucket.com/user/Nola75/media/Mobile%20Uploads/image_38.jpg.html] [/URL]
|
|
|
Post by sf on Jul 9, 2015 9:15:15 GMT -5
build looks great
|
|
jyrgnorway
2nd Gear
H2B CAFE, H2B, H1B, F8 BISON, Z1000ELR, RD500
Posts: 468
|
Post by jyrgnorway on Jul 9, 2015 15:40:51 GMT -5
WOW. All I can say: Amazing work!!
Jørgen
|
|