|
|
Post by trtdtz on Mar 3, 2015 21:24:17 GMT -5
|
|
|
|
Post by III on Mar 3, 2015 22:17:42 GMT -5
Nice set of cylinders.... Only AU $197.35 Postage to the USA
Did you join and post this stuff on all the triple forums? Lots of Aussies and Kiwis on the other boards. |
|
|
|
Post by trtdtz on Mar 4, 2015 16:07:04 GMT -5
Thanks, yes I'm sorry but the package weighs over 20 pounds I can't do much about that, the cylinders have very thick steel liners. I posted them here because I was told these might be of interest being early model ones. I believe only 5000 of these early type were made.
|
|
|
|
Post by Curtis on Mar 4, 2015 16:38:50 GMT -5
The cylinders never changed from 72-76 from what I can tell
|
|
|
|
Post by Walms on Mar 4, 2015 16:43:27 GMT -5
Nice set of cylinders.... Only AU $197.35 Postage to the USA
Did you join and post this stuff on all the triple forums? Lots of Aussies and Kiwis on the other boards. That's the going rate for air Steve, 1/2 that for surface but 12-14 weeks to get here, no matter what they tell you at the post office... Don't ask me how I know! |
|
|
|
Post by III on Mar 4, 2015 17:43:25 GMT -5
That's the going rate for air Steve, 1/2 that for surface but 12-14 weeks to get here, no matter what they tell you at the post office... Don't ask me how I know! Wasnt complaining about the cost Bubba. I know fully well what ship internationally costs. My point was to let others know so they can decide if they want to bother with them. I would love to hear what " someone" told him about the rare type cylinders though.... |
|
|
|
Post by sooperarthur on Mar 4, 2015 17:49:23 GMT -5
Are they thick liner s1 cyl? The ones that can bore to s2 size?
|
|
|
|
Post by mraxl on Mar 4, 2015 18:23:10 GMT -5
|
|
|
|
Post by trtdtz on Mar 5, 2015 17:48:39 GMT -5
Are they thick liner s1 cyl? The ones that can bore to s2 size? Yes that is what I have been told. These cylinders were apparently only fitted to the early motors with the engine number cast in one section of which only around 5000 were made. Later ones had the engine number casting in 2 pieces. I'm no expert this is what I was told by someone who knows a lot more about them than me. |
|
