|
|
Post by ralfk on Jul 25, 2013 10:39:34 GMT -5
|
|
daver
2nd Gear
Posts: 124
|
Post by daver on Oct 19, 2013 14:10:13 GMT -5
That bike is an absolute dream! Beautiful! I'm gathering parts for an H2c project and among the things I'm missing are intake parts. I didn't have much luck using paper filters on my H1. Are the foam ones a little better or easier to tune? It will cost me hundreds to assemble the parts for my intake. Just looking for some impressions on those.
Thank you
Dave
|
|
|
|
Post by drewski on Oct 19, 2013 18:03:37 GMT -5
Impressive looking machine all right! I've always loved that colour scheme!  UNI pods are a pretty good choice for aftermarket filters. Many of us have 'em on our Triples.  Don't ask Walms though.   |
|
|
|
Post by Walms on Oct 19, 2013 18:55:40 GMT -5
No comment Drewski! Excellent looking bike Ralf! Perfect for a high speed run on a highway without limits! |
|
daver
2nd Gear
Posts: 124
|
Post by daver on Oct 19, 2013 23:14:19 GMT -5
Thanks Drewski. I'm not looking for a 'soft option' when it comes to building my bike. I just had a hell of a time with a few of the different paper options out there. If I have to spend some money to get the right result I'm willing to do so. With an otherwise stock set-up will uni's likely do the job?
Thanks again
Dave
|
|
daver
2nd Gear
Posts: 124
|
Post by daver on Oct 19, 2013 23:16:00 GMT -5
Thanks Drewski. I'm not looking for a 'soft option' when it comes to building my bike. I just had a hell of a time with a few of the different paper options out there. If I have to spend some money to get the right result I'm willing to do so. With an otherwise stock set-up will uni's likely do the job?
Thanks again
Dave
|
|
|
|
Post by drewski on Oct 20, 2013 16:29:18 GMT -5
Thanks Drewski. I'm not looking for a ' soft option' when it comes to building my bike. Dave I'm not quite sure what you're implying by that Dave. Not many of us here are looking for "the easy way out" when it comes to our Triple Builds, if that's what you mean. I don't think Ralf was looking for a "soft option" for the intake on his Denco Replica. When it comes to intake solutions, obviously it's your choice and there are a number of choices. Some are better than others, but there always seems to be trade-offs. There are quite a number of us using UNI's with no complaints. |
|
daver
2nd Gear
Posts: 124
|
Post by daver on Oct 21, 2013 11:05:53 GMT -5
Hi Drewski,
Uni's it is then Drewski. I didn't realize the implication of what I had written there! Sorry about that...I'll be picking leather and shoelaces out of of my teeth for the next little while if any one needs me.
Any advice on what to do for exhaust baffles for the same bike? I attempted to cut and fit a set from some old Gt750 pipes and they were too different to make work.
Just try to get lucky on eBay?
Thanks
Dave
|
|
|
|
Post by drewski on Oct 21, 2013 12:34:34 GMT -5
No worries Dave! If you haven't already done so, you should start a "build thread" over in the Projects section. That would be the best place to get answers to your questions. Be prepared to provide an abundance of pics though!! |
|
Don't ask Walms though. 
