|
|
Post by papagriff on Mar 20, 2024 16:33:23 GMT -5
Just to let you know there is a group of us from the Niagara area that meet every second Wednesday at the Husky
truck stop on York rd. We usually have at least 20+ in attendance. There are three of us that own triples. My guess is that you would know someone there. Starts at 7:00, hope to see you there!
|
|
|
|
Post by kevinr on Mar 21, 2024 15:59:57 GMT -5
Thanks for the invite.
My Wednesdays are usually pretty busy with grandkids but I will try and stop by sometime.
|
|
|
|
Post by H2 Dude on Mar 21, 2024 18:40:53 GMT -5
Yamaond or similar for sealing the cases.
NO locktite on the bearings !!!
|
|
|
|
Post by kevinr on Mar 21, 2024 19:17:19 GMT -5
OK!!
I was having a heck of a time trying to locate either the Locktite or the Permatex equivalent. That stuff is also bloody expensive.
Jeff at NHCycle recommended the Permatex Aviation for the cases which I was able to find at Canadian Tire.
Thanks for setting me straight, and for saving me some money.
|
|
|
|
Post by crazycunuc on Apr 1, 2024 9:13:42 GMT -5
Thanks for the offer. It's always nice to have more resources when undertaking a rebuild like this.
I was riding my grey Suzuki Vstrom on Canboro Road in Fonthill a few days ago and was passed by someone on a triple.
Was that you?
I have the crank and cylinders back from Jeff at NH Cycle and I am starting the engine reassembly.
What did you use for the crankcase sealing? Did you go with Locktite 603 for the bearings?
Thanks again for your offer of assistance.
Kevin
That wasn't me. There's a guy out there with a Green S3 400 who runs a tattoo shop on Pancake Lane. Most likely him |
|
