|
|
Post by ducdon on Aug 9, 2018 22:10:44 GMT -5
 Hi! I'm working on a 72 H1 and I'd like to share my project as I go. I'm not sure how to post photos so I'll share one as an experiment.
Please let me know if it works
This is what I started with plus a box full of very greasy and ugly bits.
|
|
|
|
Post by III on Aug 9, 2018 23:53:01 GMT -5
Hi! I'm working on a 72 H1 and I'd like to share my project as I go. I'm not sure how to post photos so I'll share one as an experiment. Please let me know if it works
This is what I started with plus a box full of very greasy and ugly bits. Right click your mouse on the photo and copy links address or images address. In your post click the "Insert Image" icon at the top of the page. Insert / paste image URL in and add to post.  |
|
|
|
Post by mraxl on Aug 10, 2018 5:28:39 GMT -5
Hi! I'm working on a 72 H1 and I'd like to share my project as I go. I'm not sure how to post photos so I'll share one as an experiment.
That front wheel isn't from an H1B.
|
|
|
|
Post by Curtis on Aug 10, 2018 9:59:33 GMT -5
Looks more like an S series wheel I think - good start have fun !
|
|
|
|
Post by ducdon on Aug 10, 2018 13:30:16 GMT -5
Hi! I'm working on a 72 H1 and I'd like to share my project as I go. I'm not sure how to post photos so I'll share one as an experiment.
That front wheel isn't from an H1B.
Good eye. It's actually from a KH500, as are forks and front hub. |
|
|
|
Post by mraxl on Aug 10, 2018 17:31:17 GMT -5
Good eye. It's actually from a KH500, as are forks and front hub. No, it's not from a KH500 either. If it's a 19in rim it is an H1/A/C wheel... they were the only front drum brake models. |
|
|
|
Post by ducdon on Aug 10, 2018 21:17:09 GMT -5
Actually the drum brake and wheel are from the rear. The Hub to the right of it is the front.
|
|
|
|
Post by ducdon on Aug 10, 2018 21:29:35 GMT -5
Now that I have this Image posting thing figured out, here is a few more. Frame after pressure watch.
Fabricated swing arm pivot.
Billet Clip Ons
Billet Triple Clamp
Race Tech Springs and adapters for Gold Valves. The valves are clones intended for Yamaha XS650
Front End Assembled
|
|
|
|
Post by ducdon on Aug 10, 2018 21:40:46 GMT -5
Shop built tool to pull piston pins
Cases after Vapor Blasting
Tranny assembled with new bearings seals and shift forks
Dave Singleton rebuilt crank. Nice
Bottom end buttoned up.
The studs on the right cylinder were badly corroded, I had to wait to get replacements so I went ahead and assembled the bottom and YEP the last stud to come out broke, leading to this.
Drilling it out.
That pretty much gets me up to date. I'll post more as I get more done.
|
|
|
|
Post by mraxl on Aug 11, 2018 7:08:27 GMT -5
Actually the drum brake and wheel are from the rear. The Hub to the right of it is the front.
My bad  .... should have looked closer! I initially thought maybe you had an H1C but it is indeed an H1B. |
|
|
|
Post by crazycunuc on Aug 13, 2018 8:43:10 GMT -5
Looks like you're making good progress!!
Keep up the updates and great work
|
|
|
|
Post by ducdon on Aug 24, 2018 22:16:16 GMT -5
I now have a full set of cylinders and heads with all their fins. Welding by Robby Mchenry Metalsmithing.
While waiting for parts and paychecks I machined up some carb adapters.
|
|
|
|
Post by Curtis on Aug 25, 2018 5:30:33 GMT -5
Where did you acquire new shift forks ?
|
|
|
|
Post by shiloh on Aug 25, 2018 6:28:49 GMT -5
Nice, keep at it.
|
|
|
|
Post by ducdon on Aug 25, 2018 11:33:02 GMT -5
Where did you acquire new shift forks ? Diablo Cycle
|
|
.... should have looked closer!
