|
Post by rpa101 on Jan 26, 2018 18:59:44 GMT -5
|
|
|
Post by rpa101 on Jan 26, 2018 19:03:30 GMT -5
The motor is complete I have machined the cooling fins on the cylinders and the heads so I can flip the outside cylinders so the exhaust faces in wards
|
|
Johnny O
2nd Gear
Ride it like you stole it !!!!!!!!
Posts: 334
|
Post by Johnny O on Jan 26, 2018 20:23:45 GMT -5
The motor is complete I have machined the cooling fins on the cylinders and the heads so I can flip the outside cylinders so the exhaust faces in wards Not to rain on your party but have you checked to see if the exhaust is going to run staright into the frame downtubes or are you doing something different with the frame the 400 is very tight not like the bigger brothers..
|
|
|
Post by autofobe on Jan 27, 2018 8:11:45 GMT -5
Right on Johnny O, Been there done that.You can't flip the cyl's on any of the frames without frame mods. The h1r/h2r frames are very wide between the down tubes just for that reason.
Brad
|
|
|
Post by rpa101 on Jan 28, 2018 10:03:52 GMT -5
|
|
|
Post by rpa101 on Jan 28, 2018 10:08:51 GMT -5
Frame has been widened to accept the in board cylinders, I am making this as close to a h2r as possible
|
|
|
Post by rpa101 on Jan 30, 2018 13:41:29 GMT -5
|
|
|
Post by rpa101 on Jan 30, 2018 13:42:18 GMT -5
Just some pics of getting to where I am now
|
|
|
Post by rpa101 on Jan 30, 2018 13:43:07 GMT -5
|
|
|
Post by rpa101 on Jan 30, 2018 13:44:50 GMT -5
|
|
|
Post by pipe welder on Jan 30, 2018 14:24:28 GMT -5
Looks like your getting there.
|
|
|
Post by JA-Moo on Jan 30, 2018 15:48:54 GMT -5
I just put up a "how to" video here to get your pictures to show up here
|
|