roadrash
2nd Gear
10 McNab St.E. Port Dover
Posts: 271
|
Post by roadrash on Apr 25, 2016 15:06:20 GMT -5
Hi The kawonda had an extender for it's kick start pedal, to clear the rear sets.It came with the chambers I installed.Does anyone have dimensions?Without it I'll have to set the pegs too far back. Ok I could probably figure it out but...
|
|
|
Post by zambia on Apr 25, 2016 15:21:21 GMT -5
The kicker on my H2C had been heated and bent to clear the chambers, worked really well and didn't even mess up the chrome.
|
|
Johnny O
2nd Gear
Ride it like you stole it !!!!!!!!
Posts: 334
|
Post by Johnny O on Apr 25, 2016 16:07:00 GMT -5
The kicker on my H2C had been heated and bent to clear the chambers, worked really well and didn't even mess up the chrome. +1 I did the same thing,,,a simple propane torch will get it red hot,,, just takes a few minutes
|
|
|
Post by ballvo on Apr 25, 2016 20:42:19 GMT -5
Not sure if the S3 has the same diameter kicker shaft but on my early H1 I used a kicker from a GT500. Easily clears my rearsets and pipes.
N.
|
|
roadrash
2nd Gear
10 McNab St.E. Port Dover
Posts: 271
|
Post by roadrash on Apr 26, 2016 10:08:03 GMT -5
Thanks I'll try that.Will save a lot of machining.
|
|