|
Post by glh on Mar 17, 2016 22:16:01 GMT -5
Nice work really courous about those reeds
|
|
|
Post by triplepoweredgpz on Mar 18, 2016 0:34:22 GMT -5
Nice work really courous about those reeds What would you like to know?
|
|
|
Post by triplepoweredgpz on Mar 18, 2016 7:12:33 GMT -5
The reeds are v-force (there's no reeds in the picture, got a little clearance problem I'm taking care of) and for the boxes, I bought a Yamaha viper sled crankcase cheap...because it blew up. I cut the boxes off and had 1/4" aluminum plate welded on the back of them. So they're bolted on now, currently at the porting stage. I would have bin almost done but i was bed ridden for most of the week
|
|
|
Post by glh on Mar 18, 2016 22:01:26 GMT -5
Thank you I can't make my mind up to do something similar to what ur doing or just buy the kit can u tell me why you went this way
|
|
|
Post by triplepoweredgpz on Mar 19, 2016 5:53:21 GMT -5
Because I'm cheap, and I want to make a 100HP ...it's a lot of work, and research doing this way. Ja-moo's kit won't really make a 100 rwhp...but you just send your stuff and pay him and it's done...the other problem with the big Reed boxes is clearance...my bike is a gpz with an h1 engine, you may not get as lucky as me
|
|
|
Post by glh on Mar 19, 2016 22:12:53 GMT -5
Aylor is the ones I was thinking about and can order them and do the install myself it's a little modding but not near as much as u have done And I think by the time I buy reeds cages and boxes I won't be saving money I'm using 33mm carbs
|
|
|
Post by triplepoweredgpz on Mar 20, 2016 4:33:26 GMT -5
Walms is running that stuff, pm him. He'll give you his honest opinion
|
|
|
Post by triplepoweredgpz on Mar 25, 2016 16:45:10 GMT -5
|
|
|
Post by triplepoweredgpz on Mar 26, 2016 21:53:22 GMT -5
Added boost ports, ported exhaust 190° and 70% width
|
|
|
Post by glh on Mar 26, 2016 22:20:36 GMT -5
Can I see ur boost ports from the intake side
|
|
jyrgnorway
2nd Gear
H2B CAFE, H2B, H1B, F8 BISON, Z1000ELR, RD500
Posts: 468
|
Post by jyrgnorway on Mar 27, 2016 4:49:56 GMT -5
Added boost ports, ported exhaust 190° and 70% width Good Choice.
|
|
|
Post by triplepoweredgpz on Mar 27, 2016 5:00:07 GMT -5
Can I see ur boost ports from the intake side I still have a little more grinding to do on the intake side, deglazing and what not...but one step at a time
|
|
|
Post by triplepoweredgpz on Mar 27, 2016 5:04:48 GMT -5
Added boost ports, ported exhaust 190° and 70% width Good Choice. It was supposed to be 188° but when I put the degree wheel on it, I guess I got a little grinder happy...oh well still with in acceptable street specs...the parts are starting to show up, hopefully this thing is running soon
|
|
jyrgnorway
2nd Gear
H2B CAFE, H2B, H1B, F8 BISON, Z1000ELR, RD500
Posts: 468
|
Post by jyrgnorway on Mar 27, 2016 6:35:20 GMT -5
Kinda hard to e exactly correct With the egree Wheel anyway. I think plus minus a couple degees is "within tolerance"
|
|
|
Post by Walms on Mar 27, 2016 7:31:26 GMT -5
It would be nice to have a depth mic.
|
|