|
Post by sf on Feb 4, 2015 17:00:18 GMT -5
anybody know a good source for front & rear wheels and steering head bearing kits? allballs lists the rear & head only...
|
|
|
Post by Walms on Feb 4, 2015 17:10:37 GMT -5
I have seen countless motors with Orange and Blue silicone reck havock inside motors. I believe Curtis would agree with me. Everything from clogging oil pump screens to outright plugging off oil galleries. Like I said, 3M has several types of special gasket cements/compounds for specific usages, ie, fuel, motor oil, high heat, ect. As far as I know, Suzuki, Honda, and Yamaha all use these types of gasket cements/compounds, all of wich are made by 3M, weather it be Yamabond, Hondabond or Suzukibond name on the boxes. The stuff I'm talking about is recommended by Ford for engine assembly at dealerships. They call it gasket maker but it's just moisture curing RTV but a very good quality one. Blue and orange, sounds like the crap GE silicone they sell at Crappy Tire?
|
|
|
Post by Curtis on Feb 4, 2015 17:46:29 GMT -5
I have used Permatez flange sealer a lot, and I have had good luck with it, it remains "tacky" until it is compressed
|
|
|
Post by Walms on Feb 4, 2015 19:06:15 GMT -5
I believe it's the same stuff Curtis.
|
|
|
Post by Curtis on Feb 4, 2015 19:47:37 GMT -5
I believe it's the same stuff Curtis. Right on
|
|
|
Post by zedixe13 on Feb 5, 2015 20:44:51 GMT -5
anybody know a good source for front & rear wheels and steering head bearing kits? allballs lists the rear & head only... www.allballsracing.com/You can get tapered heads and wheels bearings and get them through Parts Unlimited or Motovan
|
|
|
Post by sf on Feb 5, 2015 21:20:37 GMT -5
Rear and head are available but not for the front.....even had a nice gal check for me.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 6, 2015 14:02:04 GMT -5
If you have the old ones just about any bearing supplier should be able to help that's how i got mine, seals too
|
|
|
Post by III on Feb 6, 2015 14:09:16 GMT -5
|
|