|
Post by rz350ypvs on Jan 21, 2015 23:18:38 GMT -5
|
|
|
Post by Curtis on Jan 21, 2015 23:37:25 GMT -5
76 a piece, that's only 225 for full top end... Not bad what's Wossners worth ?
|
|
|
Post by III on Jan 22, 2015 0:52:12 GMT -5
They take paypal so you're covered against gettin ripped off. I never heard of the seller before, have you fellas? Thats a great price because Wiseco lists the kit for an H1 at $399.00 and also show the kit as out of stock. These guys may be like Partzilla and Ron Ayers and a host of other sellers. 1st, they will let you order AND PAY for any part almost. Then send you an email a day or two later to say your order shipped incomplete. SOME items were not available. BUT.... the 2 and 3 dollar items you order along with the NLA ones, DID ship and you got nailed for the full shipping. Knowing full well, you would never have ordered those circlips, or #8 flat washers by themselves. RANT OVER
|
|
|
Post by sooperarthur on Jan 22, 2015 1:31:21 GMT -5
I can't say much about those particular Pistons but I order from that site often and always have a positive experience.
|
|
|
Post by III on Jan 22, 2015 2:10:37 GMT -5
|
|
|
Post by Ned on Jan 22, 2015 7:21:55 GMT -5
They do not mention the piston itself:
Item Contents:
2402CD - 61.00 MM RING SET CW16 - ROUND WIRE PIN LOCKS 16MM (PAIR) S256 - PIN-16MM X 2.0472-UNCHROMED-2&4 CY
|
|
|
Post by zambia on Jan 22, 2015 7:42:17 GMT -5
Yeah - the Wiseco site lists that part number as a complete kit, regular price $174. Great deal!!
|
|
|
Post by Walms on Jan 22, 2015 8:11:55 GMT -5
Seems like all the links above describe 1 piston set, not 3 The Wiseco site describes K102 as 1 piston set but they have retail price of $399. Ambiguity is a sale mans best friend! Probably worth a clarification before you hit the buy button.
|
|
|
Post by givr on Jan 22, 2015 10:14:09 GMT -5
Just bought 3. Dam good deal.
|
|
|
Post by Walms on Jan 22, 2015 10:18:44 GMT -5
I should be doing the same but my last set of Wisecraps had collapsed skirts from flogging within 2 seasons.
|
|
|
Post by givr on Jan 22, 2015 10:26:41 GMT -5
You didn't run tight enough clearances. Half a thou ONLY
|
|
|
Post by Walms on Jan 22, 2015 10:38:36 GMT -5
Let me know how that works out for ya!
|
|
|
Post by givr on Jan 22, 2015 10:47:57 GMT -5
Didn't you also do silly things like put little holes in the pistons on the intake side?
|
|
|
Post by Walms on Jan 22, 2015 10:57:34 GMT -5
Yuppers but the holes were 2/3's the top of the piston above the skirt. They can't be blamed for the yielding on the skirt. The slots I have now are a different story so I'll stick with Wossner's for the time being.
|
|
|
Post by rz350ypvs on Jan 22, 2015 12:29:40 GMT -5
I paid $340 USD for my top end in 2009.. Same kit(s) as this one.
|
|