|
Post by acceleration on Feb 18, 2020 20:58:19 GMT -5
I am gradually easing into this project, as I have a few others on the go.I recently picked up a set of spare RD 200 cylinders.And a set of oversize pistons.So we bored the cylinders here in the shop.And then proceeded to machine the intake ports, and fabricate an aluminum spacer, and fit reeds from an RD350LC,now the RD350LC carbs will fit right on the the cylinders.And in the process porting the cylinders at the same time.Working on figuring out some expansion chambers next.The look of the bike is going to change along the way.There is still a lot of work to do.
|
|