|
Post by Walms on Jan 17, 2015 12:45:02 GMT -5
My current Clough pipes were designed using TSR software and there was an option to have a 2 stage baffle cone, which I went with. From this summer, I can confirm the pipe hit hard at 7k. Inputting 3 pipes into the Vannik software, everything the same except the baffle cone. Red 17 deg baffle Black 22 deg baffle Green 1/3 8 deg 2/3 30 deg baffle
|
|
|
Post by Walms on Jan 17, 2015 12:58:14 GMT -5
Anyway, it looks like I'm going to make some new cones for these pipes and try them out. I had this crazy idea to make it so cones could be replaced... I bet I can find what I'm looking for in clamps at Andron stainless or somebody like them. I suspect in the real world, the 17 deg baffle would kill a bit of peak HP so we'll see.
|
|