|
Post by ballvo on Sept 16, 2014 10:02:43 GMT -5
A guy I know approached me with the offer of a GSXR front end he has for sale. When I asked what year and model, his reply was that the model doesn't really matter as they're all interchangeable parts. "It's '04 600 forks, '03 1000 triple trees, '05 750 clip-ons and ZX6R calipers. Basically the best of each!"Does anybody have any idea whether this is a doable swap onto an H2 frame? What kind of mods might be required? I'm thinking, at a minimum, it would need to have the H2 stem grafted onto the lower triple tree. Beyond that, I'm clueless... Cheers, N.
|
|
|
Post by givr on Sept 16, 2014 11:49:50 GMT -5
|
|
|
Post by ballvo on Sept 16, 2014 12:35:49 GMT -5
Thanks, Givr.
Any clue about using a KZ650 mag-wheeled, triple-disc setup, front and rear??
I seem to recall somebody doing that mod, either here or on the 'merican board...
N.
|
|
|
Post by autofobe on Sept 16, 2014 14:39:17 GMT -5
Front end should fit right on.The lower bearing O.D. on the kz650 is different so you will have to use the h2 bearing.That's about all for the front.Not sure about the rear. Brad
|
|
|
Post by ballvo on Sept 17, 2014 11:38:41 GMT -5
Thanks, Brad.
I thought it might be pretty straightforward.
Anybody know what's needed to fit the KZ650 swinger?
N.
|
|
|
Post by JA-Moo on Sept 17, 2014 12:26:37 GMT -5
Thanks, Givr. Any clue about using a KZ650 mag-wheeled, triple-disc setup, front and rear?? I seem to recall somebody doing that mod, either here or on the 'merican board... N. That is boat anchor stuff, just an FYI............
|
|
|
Post by givr on Sept 17, 2014 13:14:33 GMT -5
Thanks, Givr. Any clue about using a KZ650 mag-wheeled, triple-disc setup, front and rear?? I seem to recall somebody doing that mod, either here or on the 'merican board... N. That is boat anchor stuff, just an FYI............ Yep, no weight advantage with this stuff. I don't know about the spacing of the kz650 swingarm, but I had to cut the 750 swingarm and pivot shaft about 1/4" each side to get it to fit in the h1 frame. triplescanada.proboards.com/post/8963/thread
|
|