Post by kawonda750 on Jul 13, 2014 9:40:15 GMT -5
The Peacock carbs are driving me crazy. First off, H1a.
The idle adjusting screws are all the way down plus slight adjustment to synch them. There are no air leaks . There is cable slack and the cable adjuster at the bars is all the way off.
I can't get the idle down below 2000 RPM's. Cable adjusters on the carbs are down all the way plus only enough to synch the opening of the slides.
The slides are the correct ones for that year H1 and the throttle slide pins are correct and new last year.
can I get a longer pin? Any ideas? other H1's and H2's I have done have needed a number of idle screw turns just to idle.
The idle adjusting screws are all the way down plus slight adjustment to synch them. There are no air leaks . There is cable slack and the cable adjuster at the bars is all the way off.
I can't get the idle down below 2000 RPM's. Cable adjusters on the carbs are down all the way plus only enough to synch the opening of the slides.
The slides are the correct ones for that year H1 and the throttle slide pins are correct and new last year.
can I get a longer pin? Any ideas? other H1's and H2's I have done have needed a number of idle screw turns just to idle.
