|
Post by Lou on May 12, 2008 15:14:45 GMT -5
The more the merrier. I think I will attempt to get up your way the 3 weekend in June. It’s for when I build my in house quality control, I will and can run closer tolerances on the limits I allow myself…I’m not mass producing so my standards will be higher.
|
|
|
Post by Lou on May 13, 2008 10:50:31 GMT -5
Booooo Yaaaaahhhh.
|
|
|
Post by Walms on May 13, 2008 11:50:01 GMT -5
Beauty!
|
|
|
Post by givr on May 13, 2008 13:46:50 GMT -5
Nice baggie full of goodies. Hows the casting coming along?
|
|
|
Post by Lou on May 13, 2008 14:17:25 GMT -5
I will see the rough steel on the 27th...then it will be a matter of a few weeks to get the bugs out before they hit the market running.
|
|
|
Post by tripletriplenut on May 13, 2008 18:57:41 GMT -5
Lou did you have those lock tabs made or did you get lucky and find ten million for a buck on evil bay?
|
|
|
Post by Lou on May 13, 2008 19:10:39 GMT -5
They be made buddy... They set the height or depth of the locating pin so I wanted to supply them with the shift forks…they are only intended to be used once, so it made sense to produce them as well.
|
|
|
Post by Lou on May 13, 2008 19:15:49 GMT -5
The new part is actually in behind the old one in the first picture…hehehe ;D ;D ;D
|
|
|
Post by tripletriplenut on May 13, 2008 21:29:35 GMT -5
where not suppose to reuse them now you tell me d'oh
|
|
|
Post by Lou on May 14, 2008 7:55:17 GMT -5
I'm guilty as well ;D With the new parts I don't want there to be a chance of a broken tab going in the gears...for me it like insurance if I supply them with my forks buddy.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 14, 2008 9:40:34 GMT -5
They be made buddy... they are only intended to be used once, so it made sense to produce them as well. ooops.........I was a newbie and it's been three years. Boy that Lou is a fart smeller, he thinks of everything
|
|
|
Post by Lou on May 14, 2008 9:47:41 GMT -5
With the help of all the great guys on this site anything can be done, I'm thinking... I can't thank most of you enough...it's fun guys. ;D ;D
|
|
|
Post by djfisher22 on May 14, 2008 10:12:43 GMT -5
With the help of all the great guys on this site anything can be done, I'm thinking... I can't thank most of you enough...it's fun guys. ;D ;D Ahhh shucks......
|
|
|
Post by Lou on May 15, 2008 7:50:43 GMT -5
Oh , DJ...you’re just needing a group hug… wait till you come up to Canada later this year...We will have a big group hug like at the last Canadian triples rally.
|
|
|
Post by Lou on May 15, 2008 7:51:43 GMT -5
I'm the short one...you can't see my face
|
|