|
Post by givr on Aug 23, 2010 12:15:52 GMT -5
Looking for information on the welded tube section that has the rubber insert for H2B rear exhaust mount. They were removed from my H2B frame and I want to weld some new ones on. A pic would be great, but I really need length, wall thickness and OD.
|
|
joker
2nd Gear
Posts: 418
|
Post by joker on Aug 23, 2010 16:39:29 GMT -5
Is this what you are looking for? If so, I can get some measurement tomorrow. Night job tonight I need to wash my bike!!!
|
|
|
Post by machz on Aug 23, 2010 20:30:27 GMT -5
I'm not sure how to put up multiple pics so here is one at a time. Attachments:
|
|
|
Post by machz on Aug 23, 2010 20:31:44 GMT -5
2 Attachments:
|
|
|
Post by machz on Aug 23, 2010 20:32:48 GMT -5
3 Attachments:
|
|
|
Post by machz on Aug 23, 2010 20:33:35 GMT -5
4 Attachments:
|
|
|
Post by machz on Aug 23, 2010 20:39:34 GMT -5
Both tube sections are the same dimensions. These measurements include the powdercoating of course. So wall thickness is about 4.5mm. Let me know if you need anything else.
Peter
|
|
|
Post by givr on Aug 24, 2010 8:36:30 GMT -5
Thanks for that guys. That's all the information I need.
|
|